AK Sponsor
Posted: 11/27/2010 6:59:55 PM EDT
|
only screw-up is in this first picture: 
hammer slipped on one of the trunnion rivets 
I covered it in rubberized truck-bed liner because I seen a thread somewhere one here where somebody did that to some handguards and I liked the look. What do you guys think? |
pretty durable w/ the rubber. not sure how it holds up to the heat of the barrel. the real question is how do you like it? it is your rifle after all.
|
Your AMD65 looks good hammer slip or not.
Is your's as lowed as mine, I don't need to hear it I can feel it fire. The muzzle brake makes the blast feel like it comes right back at me. Did you paint the upper rails? If you did how did you get the bolt carrier thought the paint? My AMD65 was painted with a thick heat resistant paint & I had a problem getting it to slide down the rail. After painting and baking I assembled it & the bolt carrier was dragging. I had to sandblast, file the upper rails thinner, repaint & bake to harden the paint. The rework helped but it was still a little stiff, after a couple hundred rounds it loosened up and shoots good now. |
|
Quoted:
Your AMD65 looks good hammer slip or not. Is your's as lowed as mine, I don't need to hear it I can feel it fire. The muzzle brake makes the blast feel like it comes right back at me. Did you paint the upper rails? If you did how did you get the bolt carrier thought the paint? My AMD65 was painted with a thick heat resistant paint & I had a problem getting it to slide down the rail. After painting and baking I assembled it & the bolt carrier was dragging. I had to sandblast, file the upper rails thinner, repaint & bake to harden the paint. The rework helped but it was still a little stiff, after a couple hundred rounds it loosened up and shoots good now. sorry for the late reply, but no I made sure not to get any on the inside at all |
AK Sponsor