AR Sponsor
Posted: 3/20/2012 8:29:43 AM EDT
| Need to get one...unless someone has a better method or way to clean the chamber. Let me know what you guys think. Thanks |
|
Quoted: Need to get one...unless someone has a better method or way to clean the chamber. Let me know what you guys think. Thanks http://www.midwayusa.com/product/367843/otis-pro-taper-rifle-chamber-brush-ar-15-8-x-32-thread-bronze If you need to really clean the chamber, a mop aint gonna do it. Use one of these and then spray it out good with solvent. |
|
Quoted:
Quoted:
Need to get one...unless someone has a better method or way to clean the chamber. Let me know what you guys think. Thanks http://www.midwayusa.com/product/367843/otis-pro-taper-rifle-chamber-brush-ar-15-8-x-32-thread-bronze If you need to really clean the chamber, a mop aint gonna do it. Use one of these and then spray it out good with solvent. Got one of those already but they dont wipe out anything just knock it lose and then you need to get in there to get it out...why I want a mop |
|
Quoted: Quoted: Quoted: Need to get one...unless someone has a better method or way to clean the chamber. Let me know what you guys think. Thanks http://www.midwayusa.com/product/367843/otis-pro-taper-rifle-chamber-brush-ar-15-8-x-32-thread-bronze If you need to really clean the chamber, a mop aint gonna do it. Use one of these and then spray it out good with solvent. Got one of those already but they dont wipe out anything just knock it lose and then you need to get in there to get it out...why I want a mop OK???? I thought you wanted to know if there was a better method, but if you really want a chamber mop then knock yourself out. The chamber mop won't do nearly as good a job as you think it will. |
|
Quoted:
Got one of those already but they dont wipe out anything just knock it lose and then you need to get in there to get it out...why I want a mop See my link below. Scroll down to my chamber cleaning photo. A pistol patch or piece of rag draped over the chamber brush is all that I use. Hasn't let me down yet. http://www.weaponevolution.com/forum/showthread.php?1605-CLEANING-WITH-BREAK-FREE-BORE-CLEANING-FOAM |
|
Quoted:
I cut the tips off q-tips and put them at an angle on some forceps (hemostats). Has never let me down. ETA- I do this AFTER I spray the chamber out with breakfree powder blast and thoroughly clean with a chamber brush. This is pretty much what I do too, works fine. |
AR Sponsor