AR Sponsor
Posted: 4/28/2010 7:44:25 AM EDT
|
I am about to get my rra nm ar-15. I have a rifle sling, scope, extra p mags all loaded up, and I'm ready for some target shooting.
My question is this, base on not many of the links still active in the cleaning part of this forum: What would you suggest getting for cleaning and maintenance? I have been looking a the rra's cleaning station, made of oak. I have also been looking at a Sinclair AR-15 Vise Block. I don't know what is really necessary to get by with. Redundantly appreciative, Nost |
|
You will get a bunch of CLP and Mobil 1 (yes, as in automobile engine) oil recommendations...all well & good but I recommend using what your manufacturer recommends.
Never owned a RRA, but if they don't specify in the owner's manual what to use, I prefer SLIP and/or TWB-25 + MC3000 as recommended by the manufacturer of my weapons (LWRCI). I "preclean" with Kroil...a few strokes with that and let it sit to loosen carbon/crud, but you shouldn't have a big problem with that right off the bat and the entire step is optional. FWIW, we also use TWB-25 & MC3000 exclusively on our CQBRs, M4A1s, M240s, GAU-17s and 25 & 30mm chain guns. If that's not a good enough reason, maybe THIS is. Have fun. |
|
I just ordered one of these:
Plastix Plus I took the advice of someone on another post I happened upon. Nost. I "preclean" with Kroil...a few strokes with that and let it sit to loosen carbon/crud, but you shouldn't have a big problem with that right off the bat and the entire step is optional. I also use "Kroil", it's great for cleaning and lubricating my other hg's, so I think it would be good for this gun as well. I am more interested in "special tools" I will need to get the maintenance with. I was also interested in the cleaning stand, but now I've got that. |
|
Quoted:
I just ordered one of these: Plastix Plus I took the advice of someone on another post I happened upon. Nost. I "preclean" with Kroil...a few strokes with that and let it sit to loosen carbon/crud, but you shouldn't have a big problem with that right off the bat and the entire step is optional. I also use "Kroil", it's great for cleaning and lubricating my other hg's, so I think it would be good for this gun as well. I am more interested in "special tools" I will need to get the maintenance with. I was also interested in the cleaning stand, but now I've got that. There are no "special tools" needed for cleaning an AR. Optimal word is NEEDED. Cleaning is a very personal matter and what you choose to use depends on your definition of clean. Some people like them spotless, clean as the day they bought it, and fret over any scratch on the finish or wear marks on the BCG. Some people pride themselves on never cleaning their rifle or seeing how long they can go between cleanings. I was in the army and have it drilled into my head to clean my weapons after each range trip. (and sometimes just pull them out and clean them because I like doing it**) Since I clean them after use, I have no real problems with massive carbon build-up or getting them clean with just the minimum gear. The only "tools" I need to clean my AR's is a .223 bore brush and a chamber brush. I use USGI cleaning rods or the Otis flexible rod with the brushes. I also use a GI Toothbrush, but I consider it optional as well as the hoppes silicone gun cloth I like to wipe them down with. I also need some patches, but I consider them consumables, not a tool. Some people seem to need a handguard removal tool, an AR Carbon Scraper, and a cleaning stand. ** If you have a teenage daughter, nothing says howdy to a boy coming to the house to pick her up than greeting him on the front deck cleaning a .45 or an AR 
|
|
Quoted:
Quoted:
I just ordered one of these: Plastix Plus I took the advice of someone on another post I happened upon. Nost. I "preclean" with Kroil...a few strokes with that and let it sit to loosen carbon/crud, but you shouldn't have a big problem with that right off the bat and the entire step is optional. I also use "Kroil", it's great for cleaning and lubricating my other hg's, so I think it would be good for this gun as well. I am more interested in "special tools" I will need to get the maintenance with. I was also interested in the cleaning stand, but now I've got that. There are no "special tools" needed for cleaning an AR. Optimal word is NEEDED. Cleaning is a very personal matter and what you choose to use depends on your definition of clean. Some people like them spotless, clean as the day they bought it, and fret over any scratch on the finish or wear marks on the BCG. Some people pride themselves on never cleaning their rifle or seeing how long they can go between cleanings. I was in the army and have it drilled into my head to clean my weapons after each range trip. (and sometimes just pull them out and clean them because I like doing it**) Since I clean them after use, I have no real problems with massive carbon build-up or getting them clean with just the minimum gear. The only "tools" I need to clean my AR's is a .223 bore brush and a chamber brush. I use USGI cleaning rods or the Otis flexible rod with the brushes. I also use a GI Toothbrush, but I consider it optional as well as the hoppes silicone gun cloth I like to wipe them down with. I also need some patches, but I consider them consumables, not a tool. Some people seem to need a handguard removal tool, an AR Carbon Scraper, and a cleaning stand. ** If you have a teenage daughter, nothing says howdy to a boy coming to the house to pick her up than greeting him on the front deck cleaning a .45 or an AR
Thanks for the info/advice, I am really looking forward to my RRA AR, should be here withing a week or two. Here she is (A4 version) Nost. |
|
Quoted:
<snip> Thanks for the info/advice, I am really looking forward to my RRA AR, should be here withing a week or two. Here she is (A4 version) Nost. Very nice rifle. I am a RRA fan. All my lowers are RRA. Quoted:
Dewey Rod and Bore Guide ^^^^^^ This is probably a good idea for a match grade rifle. (instead of USGI cleaning rods) |
AR Sponsor