AR Sponsor
Posted: 12/10/2008 4:42:26 PM EDT
|
hi , i buy a new ar15 and this is my questions
1 . i want a list of cleaners i can buy to clean my rifle for buy one of the list . 2. i want a list of oils i can use to lube the rifle ? 3. what i can use to clean inside the barrel ? thanks all PD: i hear something about the CLP i can use CLP to clean and lube at the same time with this product ? |
|
I like to put SLiP2000 Extreme Weapons Grease on Bolt/Carrier (extreme temp, stays where you put it, etc) http://www.slip2000.com/slip2000-EWG.html Then SLiP2000 Extreme Weapons Lubricant on everything else (anti wear, deep penetration and doesn't attract dirt/dust) http://www.slip2000.com/slip2000-EWL.html |
|
Quoted:
hi , i buy a new ar15 and this is my questions 1 . i want a list of cleaners i can buy to clean my rifle for buy one of the list . 2. i want a list of oils i can use to lube the rifle ? 3. what i can use to clean inside the barrel ? thanks all PD: i hear something about the CLP i can use CLP to clean and lube sametime with this product ? 1. Hoppe's is hard to beat for routine cleaning. 2. Use Breakfree LP on the bolt carier group and lugs. Use Breakfree CLP lightly on the firing pin. Use CLP everywhere else. 3. CLP will clean the barrel; so will Hoppe's. If you get copper deposits, use Sweet 7.62. If you go out into the field and can only take one product, I'd take CLP. Cleans, Lubes, Protects. |
|
Quoted:
I like to put SLiP2000 Extreme Weapons Grease on Bolt/Carrier (extreme temp, stays where you put it, etc) http://www.slip2000.com/slip2000-EWG.html Then SLiP2000 Extreme Weapons Lubricant on everything else (anti wear, deep penetration and doesn't attract dirt/dust) http://www.slip2000.com/slip2000-EWL.html This is what I use also! 
|
|
Do we really need the personal attacks in the tech forums?? You know English isn't everyone's first language. The guy is just looking for some advise, cut him some slack.
His response was edited. Quib __________________________________________________________________________________ I used mostly Hoppes and Breakfree CLP, but next time I'm out I might be looking at the Slip2000 products. |
| I am not in the forum for problems I only am so that I need help, the FallingDown user it begins to take me offense without to have said nothing to him to and i feel discriminated to me by not knowing English perfectly users as they are those that damage a professional forum like this |
|
Quoted:
I am not in the forum for problems I only am so that I need help, the FallingDown user it begins to take me offense without to have said nothing to him to and i feel discriminated to me by not knowing English perfectly users as they are those that damage a professional forum like this jonzina123, Please do not take offense to the comments by the member above. I have taken care of it. If you encounter any more problems like this please do not hesitate to Instant Message me. This type of behavior will not be tolerated....period! I hope you can over look this incident and not let it give you a bad impression of AR15.com. There are a lot of knowledgeable people here on this site who are more than willing to help out. But, like on every internet forum you have a few bad apples. Please do not hesitate to continue visiting and please do not hesitate to ask questions. Welcome to ARFCOM. 
Quib Moderator |
|
Quoted:
Quoted:
hi , i buy a new ar15 and this is my questions 1 . i want a list of cleaners i can buy to clean my rifle for buy one of the list . 2. i want a list of oils i can use to lube the rifle ? 3. what i can use to clean inside the barrel ? thanks all PD: i hear something about the CLP i can use CLP to clean and lube sametime with this product ? 1. Hoppe's is hard to beat for routine cleaning. 2. Use Breakfree LP on the bolt carier group and lugs. Use Breakfree CLP lightly on the firing pin. Use CLP everywhere else. 3. CLP will clean the barrel; so will Hoppe's. If you get copper deposits, use Sweet 7.62. If you go out into the field and can only take one product, I'd take CLP. Cleans, Lubes, Protects. 1. Para limpiar en general, use Hoppe's Numero Nueve. 2. Use mucho de Breakfree LP en los partes del "bolt." Use CLP en los otros partes del fusil. 3. Es posible limpiar polvoro con CLP o Hoppe's. Es mejor limpiar cobre con Sweet's 7.62. Si tiene solamente un limpiador, como ud. es en el campo, traiga CLP. Y bienvenidos al website AR15.com! |
|
Quoted:
hi , i buy a new ar15 and this is my questions 1 . i want a list of cleaners i can buy to clean my rifle for buy one of the list . 2. i want a list of oils i can use to lube the rifle ? 3. what i can use to clean inside the barrel ? thanks all PD: i hear something about the CLP i can use CLP to clean and lube at the same time with this product ? BreakFree-CLP (Cleaner, Lubricant, Preservative) is for cleaning the rifle, cleaning the barrel and for lubricating & protecting the entire M-16/AR-15 rifle. http://www.break-free.com/?location=/products/index.asp If needed, I may decide to use Shooter's Choice Bore-Cleaner to clean the inside of the barrel. http://www.shooters-choice.com/mc7.html |
|
I use breakfree clp on pretty much everything and its been doing a great job. I have both the spray can and aerosol can. I use the aerosol can for the places where i cant reach to scrub.
Also go out and get yourself a boresnake from hoppes . It will save you a lot of time in cleaning your barrel. Just put a little clp on the front end and run it through your barrel two or three times and your done. I also went out and purchased 12 guage shotgun patches. they really help when cleaning the bolt carrier, firing pin, etc. |
|
don't worry friends in fact all an help me much all of yours are professional people that is why I am in this forum and I like much so that they help me fast and i reads different opinions and I learn but on the arms
and if anybody of yours see my other topics remember my language is spanish but i can try to write in english i can understand english not much but in many times i use a translator and is very helpful to me thanks to all and in this forum have professional people i always knowed and greetings to all experts in this forum |
|
Hello, Check out this new AR website for info and a lub you can make yourself. http://www.tacticalgunfan.com/index.php?option=com_content&task=view&id=341&Itemid=78 This site is a must for the new AR owner: http://www.brownells.com/aspx/NS/GunTech/newsletterarchive.aspx?x=v&mc_ID=2018 Willy1947 |
If you don't like Slip 2000 Products. I would try Shooters Choice FP 10 or Firepower 10 for oil and barrel lube and use Hoppes Regular or Copper Solvent for General Cleaning. Sweet's 7.62 Solvent for extreme copper build up-Don't leave in barrel more than 15 MINUTE. Break Free Power Blast is hard to beat for an aerosol degreaser. But, I'll tell you after 25 years of shooting and cleaning guns nothing beats Slip 2000 and Ive gone through generations of products. If anyone knows of a better product that is as economical please e-mail me. 
|
|
For cleaning I use Hoppe's number 9 solvent. As for lube, I like Hoppe's number 9 gun lube.
hoppe's solvent hoppe's gun lube |
|
Believe or not I tried useing Mobile 1 0W oil to lube the outside of the bolt carrier and the surface of the charging handle. I figured that modern synthetic motor oils are prolly way ahead of gun oil tech. The reason I used it because I like to target practice and unfortunately I can only do that outside (highs around 15) in Michigan. It really worked well. The oil bound to the metal and the even moving the bolt was smooth - It really improved the metal on metal feeling I got when using Rem oil.
Dont get me wrong, 0W oil worked for me, but I'm not sure how good it is at repelling moisture so on other parts of the rifle to prevent corrosion I still use Remoil. Good Luck! |
|
Quoted:
For cleaning I use Hoppe's number 9 solvent. As for lube, I like Hoppe's number 9 gun lube. hoppe's solvent hoppe's gun lube When you say lube.....do you mean grease or lubricating oil? Do we need both grease and lub oil on AR? |
|
Quoted:
CLP works great, but then again, I normally use whatever gun cleaner/oil I happen to have lying around, never had any problems. I agree, I do samething, I happened to have right in the cleaning circle Slip2000 and FP10. A few months ago I had CLP for everthing, cleaning, lubing. A few month before the CLP I had a bout with RemOil.....Next month, who knows..... |
|
Quoted:
Quoted:
For cleaning I use Hoppe's number 9 solvent. As for lube, I like Hoppe's number 9 gun lube. hoppe's solvent hoppe's gun lube When you say lube.....do you mean grease or lubricating oil? Do we need both grease and lub oil on AR? I use Hoppe's lubricating oil not grease. I personally do not use grease on any ar-15 for normal lubrication of the moving parts (bolt and bolt carrier etc.). |
|
Hoppes #9 or Breakfree foaming bore cleaner for the bore.
Breakfree CLP as a general all-around cleaner ( internals ) TW25B on the hammer and trigger pin areas + sear surface. This is when I have the desire and or time. If I'm at the range or out of some items, I'll just hit it with CLP in all areas. As an all-around product, CLP is hard to beat. Cost is fair, results are great, availability ( USA ) is very good. Lastly, welcome to the sickness. ( This group and AR's in general ) 
|
AR Sponsor