AR Sponsor
Posted: 1/12/2006 10:33:05 AM EDT
|
My question is how to remove the retaining pin from bolt ejector pin and spring. Is it a compressed pin? or do I push the ejector pin down "so much" to remove that pin. Because the Ejector Pin has a "step" cut out..,Right? Any assistance would be helpful. |
|
It takes a punch and hammer to remove the roll pin that secures the ejector. Be aware, some are an absolute bitch to remove, they are so tight. There is a fancy tool for this, but just place it all inside a ziplock baggie and then place the bolt in a *padded* bench vise. This way when the ejector and spring go flying out of the bolt they stay inside the baggie. |
+1 Good Advice |
AR Sponsor