AR Sponsor
Posted: 7/14/2013 7:52:20 AM EDT
| Im building a lower having an issue with my trigger pin. It went in hard and the trigger is hard to move and is not resetting after being pulled. I noticed that the pin rotates when looking at the side of the lower when the trigger is pulled. Is the trigger assembly spouse move/rotate freely on the pin? I pulled the pin and removed the trigger and tried to put the pin into the trigger assembly outside of the gun and took some force to get the pin into the trigger. |
|
Quoted:
Im building a lower having an issue with my trigger pin. It went in hard and the trigger is hard to move and is not resetting after being pulled. I noticed that the pin rotates when looking at the side of the lower when the trigger is pulled. Is the trigger assembly spouse move/rotate freely on the pin? I pulled the pin and removed the trigger and tried to put the pin into the trigger assembly outside of the gun and took some force to get the pin into the trigger. You have burs on the side of C channels for the trigger. Use a file and remove the burs. The trigger has to freely rotate on the pin when dry fit to it outside of the rifle. |
|
Quoted:
You have burs on the side of C channels for the trigger. Use a file and remove the burs. The trigger has to freely rotate on the pin when dry fit to it outside of the rifle. Quoted:
Quoted:
Im building a lower having an issue with my trigger pin. It went in hard and the trigger is hard to move and is not resetting after being pulled. I noticed that the pin rotates when looking at the side of the lower when the trigger is pulled. Is the trigger assembly spouse move/rotate freely on the pin? I pulled the pin and removed the trigger and tried to put the pin into the trigger assembly outside of the gun and took some force to get the pin into the trigger. You have burs on the side of C channels for the trigger. Use a file and remove the burs. The trigger has to freely rotate on the pin when dry fit to it outside of the rifle. This was the problem. I removed burs from the C channel and everything is working the way I though it should be. |
AR Sponsor