[ARCHIVED THREAD] - Feed problems

Posted: 10/5/2007 5:28:08 PM EDT

My new Del-Ton upper won't reliably feed. The bolt will often close on an empty chamber after ejecting the spent case ... or will get hung up on a round as it's halfway up the feed ramps.

It's not magazine-specific ... happens with all my mags, both surplus and Magpul polys.

Basically, it looks like it's not stripping rounds off the magazines properly.

Anything I should be looking at?

Posted: 10/5/2007 5:29:52 PM EDT

[#1]

what length barrel? sounds like it might be a low pressure problem--

Posted: 10/5/2007 5:37:15 PM EDT

[#2]

16" mid-length gas

Posted: 10/5/2007 5:44:27 PM EDT

[#3]

nevermind, not pressure, just reread your post. Sounds like a mating problem between the upper & lower maybe....

Posted: 10/13/2007 3:39:15 PM EDT

[#4]

i had the same problem with one of my rifles, swapped to an H2 buffer and upgraded the extractor and now it works great

Posted: 10/13/2007 5:42:45 PM EDT

[#5]

Will the rifle pass a short stroke test?

[ARCHIVED THREAD] - Feed problems

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Feed problems

[ARCHIVED THREAD] - Feed problems