Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 2/15/2006 9:44:32 AM EDT
[Last Edit: 2/15/2006 10:30:21 AM EDT by cbsbyte]
I noticed that if I have my finger on the trigger after pulling, it will not fully reset. It seems that if my finger is on it, then the trigger is unable to fully move forward to reset. It also does this when dry firing with the upper removed from the lower. It is annoying to say the least. Is this normal for AR triggers. And can this be fixed or do I need new parts?

Thank You,
Link Posted: 2/15/2006 12:59:29 PM EDT
Does it reset if you are firing live ammo?

Function Checking The Rifle

1. Pull the charging handle to cock the hammer.

2. Pull the trigger -- the hammer should fall.

3. Without releasing the trigger, pull the charging handle back again to cock the hammer. The hammer should be caught by the disconnector.

4. Release the trigger -- the hammer should NOT fall. It should be caught by the trigger.

5. Hammer should fall when trigger is pulled now.
Link Posted: 2/15/2006 3:45:40 PM EDT
[Last Edit: 2/15/2006 3:48:35 PM EDT by cbsbyte]
No it does not reset when fired with ammo. I uselly have to push the trigger to its full forward position when shooting. I checked the the hammer and it is cocked back but the trigger does not reset. It seems I will have to contact the AR manufacture.
Link Posted: 2/15/2006 6:52:59 PM EDT
Top Top