AR Sponsor
Posted: 3/21/2004 6:11:56 PM EDT
|
My trigger doesn't after firing and fails function test. Any idea? Thanks Glockdog Airborne!! |
|
Trigger spring goes forward, with the bend under the front of the trigger, and the legs pointing forward with them down against the bottom of the receiver cavity. The disconnector spring's large side coil goes down into the back of the trigger slot, with the smaller coil side pressing up against the bottom of the disconnector. The hammer spring goes with the bend on the backside of the hammer, and the spring legs ride on top of the trigger pin (sides of the trigger). The hammer should be the last piece installed in the lower. Also helps to lube the parts before you install them, and pre-fit the trigger pin and disconnector into the trigger to make sure that the trigger doesn't have a channel bur that is catching/binding the pin. [url]http://www.ar15.com/content/docs/assembly/[/url] |
AR Sponsor