AR Sponsor
Posted: 8/6/2014 7:10:46 PM EDT
|
Hello everyone,
Long-time lurker. I recently ordered several parts from PWS and they were not up to my expectation. I was just curious as to your experience with PWS. Today I received a 16.1" DI barrel, which was flawless except for a noticeable nick in the barrel that can be felt when you run your finger over it. This is not the reason I post, as this is just possibly a manufacturing defect or happened while in transit. The main reason why I post is as follows: The buffer has reciprocating weights in it. I didn't expect them to be sliding around so noticeably, is that normal? Lastly, with regards to their complete BCG, I received it and noticed immediately that the bolt is apparently stuck. It doesn't reciprocate and can't be removed. I was curious if anyone has had any experience with this product from PWS. Any tips on how to remove the bolt from the carrier? I can say for certain that there is absolutely NO lube on it. Could it be wedged? I will update you to the progress of my situation. Kind regards, D P.S.: I can provide pictures if required |
|
Barrel: cosmetic IMO; won't affect function.
Buffer weights: normal; that's how they buffer, by reciprocating. Stuck bolt: where is it stuck? BCG stuck in upper or bolt stuck in carrier? Sounds like bolt in carrier from your last statement. You could try putting some form of oil/lube on it and trying again. It should be totally free to move but should move with a little bit of force. |
AR Sponsor