AR Sponsor
Posted: 6/8/2011 1:37:31 PM EDT
|
First build here.. The upper half is all dpms parts that I assembled.
20" barrel––almost an inch under the handguard but necks down to .75" at the gas block. Gas block is an A2 front sight cut down and blended then recoated which was a little work but it is staked to the barrel which means its not going to move. Samson evolution 15" handguard––This thing is nice and looks good too.. Very functional. Stock is dpms and serves its purpose. At 42.00 for the stock, buffer tube, buffer and buffer spring it was a deal. It will wear an ACS shortly. Lower was machined from a 80%. I used a dpms lower parts kit. Did some custom engraving on the lower on the machining center. Mbus sights for break in then it will wear a burris ballistic plex 3-9 x 40. http://i67.photobucket.com/albums/h306/fwissa/IMG_0401.jpg http://i67.photobucket.com/albums/h306/fwissa/IMG_0397.jpg http://i67.photobucket.com/albums/h306/fwissa/IMG_0399.jpg[/img] |
AR Sponsor