Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
AR Sponsor
2/2/2010 5:21:10 PM EDT


   Finished my first complete 15, 45 minutes ago and I am not impressed.
 I have made a mistake somewhere. I suspect thier is something wrong in the FCG.
    I fired it off the deck, but you have to let the trigger go foward all the way after it fires and (clicks)
 then it will fire on the next trigger pull!



                                              WTF







                              Any Answers
2/2/2010 5:38:50 PM EDT
[#1]
Quoted:


   Finished my first complete 15, 45 minutes ago and I am not impressed.
 I have made a mistake somewhere. I suspect thier is something wrong in the FCG.
    I fired it off the deck, but you have to let the trigger go foward all the way after it fires and (clicks)
 then it will fire on the next trigger pull!



                                              WTF









                              Any Answers


Que?
2/2/2010 5:50:01 PM EDT
[#2]
First thought that goes through my mind is that the disconnector spring is either upside down (big side needs to be down) or has been switched with the bolt release spring. Next thing I would look at is the disconnector itself. Occasionally these are bent/warped when being punched and hang up in the trigger channel.
2/2/2010 7:10:29 PM EDT
[#3]
Is the trigger not releasing and staying to the rear after firing? If that's the case the hammer and sear have to be broken in. I always ride the hammer with my thumb and pull the trigger and reset until the trigger releases like its supposed too.
2/2/2010 8:26:45 PM EDT
[#4]
That is the normal operation of an AR15.  You press trigger, release trigger you'll hear the reset click and pull trigger again.  It is not DA/SA like a pistol
AR Sponsor