AR Sponsor
Posted: 1/23/2010 4:34:29 PM EDT
|
I'm starting to but my larue lower together. I had planned to take out a rra 2 stage trigger from a previous build and
use in the larue lower. I took the trigger out of the previous build and then recalled the over sized pins that were used when I installed it. They measure .156. The pins for the stock trigger are .154 and slip right thru the holes on the previous build. I assume the oversize pin opened up the holes. the question is, is now that I have had a .156 pin in that lower am I forced to stay with the oversize pins since the smaller pins drop right thru. Second question, if I use the larger pins with the nm trigger on the larue lower that will obviously open up the holes on that lower. Will that bite me in the but later if I decide to upgrade down the road to a Gisele or a timminy? I know I'm making this way to hard but thought Id ask 
as always thanks for the input... |
AR Sponsor