AR Sponsor
Posted: 1/14/2010 5:15:21 PM EDT
I have seen the topics about the set screw method of adjusting the trigger "travel". But when I try it the set screw barely starts to take up any of the travel and then the safety stops working properly. I can get almost all of the travel out before the hammer trips, and then back it out a round or to two, but the safety keeps giving me problems. It is on a Double Star lower. [b]What am I doing wrong Thanks
|
|
Quoted:
LINK dont know how to make it hot http://www.junkyardgenius.com/firearms/ar-15/ar08.html Like this. 
http://www.junkyardgenius.com/firearms/ar-15/ar08.html |
|
Quoted:
Quoted:
LINK dont know how to make it hot http://www.junkyardgenius.com/firearms/ar-15/ar08.html Like this.
http://www.junkyardgenius.com/firearms/ar-15/ar08.html article calls for a 1/4-20 set screw. you need a 1/4-28 set screw. if you use a 5/16 long set screw you probably won't need to shorten your pistol grip screw, or use washers. also, you may have to tap out the rest of the pistol grip screw hole. sometimes they aren't tapped all the way through. every set screw mod i've done, (and i've done several), i've never had to file the back side of my trigger. |
AR Sponsor