AR Sponsor
Posted: 7/13/2009 6:45:34 PM EDT
|
Hi all,
Great site here. Okay, I admit I have the AR bug and I'm going to move on. I have a 20" barreled rifle, with a standard buttstock, that I assembled a couple of years ago. It's been fun, but now I want to change it around. I want to make it a short barrel (16 inch or a 14.5 with a FS pinned and welded), and a multi-position butt stock. My question is: Other than changing the barrel, gas tube, and hand guard, will I need to change anything else in the upper, such as the bolt? I am going to retain the original 5.56mm chambering. Thanks in advance. Y |
|
chamber will change with barrel, if you want to keep 5.56 chamber, buy a 5.56 barrel
to change to a carbine you will need the following carbine stock carbine receiver extension carbine receiver extension end plate and castle nut carbine buffer carbine buffer spring shorter barrel shorter gas tube shorter handguard |
AR Sponsor