[ARCHIVED THREAD] - A2 Stock

Posted: 6/8/2007 6:58:13 AM EDT

I've assembled a hand-full of lowers - all with collapsibles.

Tried my first A2 stock yesterday. When tightened all the way down, there is still a 1/2 " of play between the stock and tube. Looks like I'm missing a nut or spacer of some kind.

What do I need?

Posted: 6/8/2007 8:23:09 AM EDT

[#1]

Quoted:
I've assembled a hand-full of lowers - all with collapsibles.

Tried my first A2 stock yesterday. When tightened all the way down, there is still a 1/2 " of play between the stock and tube. Looks like I'm missing a nut or spacer of some kind.

What do I need?

did you remove the stock from the tube, and install the tube on its own?

did the spacer get installed on the end of the tube?

Posted: 6/8/2007 8:58:40 AM EDT

[#2]

The kit simply lacked the spacer. Spoke with the vendor and she said RRA has a lot of new faces walking around.

All is well...spacer is on the way.

Posted: 6/8/2007 12:01:08 PM EDT

[#3]

I seen some not tighten down enough on the A2 butscrew causing the A2 stock to have play.

They hit the threadlocker on the screw and stop because it got a little hard to turn. I've pulled the screw out and put back in using a BF screwdriver and stock is tight.

[ARCHIVED THREAD] - A2 Stock

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - A2 Stock

[ARCHIVED THREAD] - A2 Stock