[ARCHIVED THREAD] - DPMS Hammers

Posted: 5/29/2007 4:31:19 AM EDT

I have a complete RRA pistol lower and a complete CAR lower on order from RRA. WHen they get here i want to swap out the notched hammers for the rounded ones from DPMS. Can i remove the hammers and springs without having to remove anything else?

I am just trying to plan ahead so both lowers will be ready for 5.56 and 9mm use.

Posted: 5/29/2007 4:36:28 AM EDT

[#1]

While it's good to look/review the tacked topics like those atop the "Build It Yourself" forum and the Information button above for how to accomplish your proposed task; you will have to remove the grip screw in order to remove the selector switch (fire/safe), then you can remove the FCG pins.

mike

Posted: 5/29/2007 7:13:05 AM EDT

[#2]

Quoted:
While it's good to look/review the tacked topics like those atop the "Build It Yourself" forum and the Information button above for how to accomplish your proposed task; you will have to remove the grip screw in order to remove the selector switch (fire/safe), then you can remove the FCG pins.

mike

I've never had that problem.

Posted: 5/29/2007 10:55:26 AM EDT

[#3]

You can replace just the hammer and its spring by tapping out the pin. NO problem. Nothing else has to be removed.

Posted: 5/29/2007 2:05:40 PM EDT

[#4]

Thanks everyone for your response. Now,,,,,,,,the long 4 month wait (august) till my complete RRA lowers show up UGH!!!! Then i can change hammers and be able to change between 5.56 and 9mm without grooving the 9mm bolt.

[ARCHIVED THREAD] - DPMS Hammers

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - DPMS Hammers

[ARCHIVED THREAD] - DPMS Hammers