AR Sponsor
Posted: 3/28/2007 3:06:45 AM EDT
| Can someone please explain the procedure in using the set screw in a Superior Arms lower to adjust/tune your trigger? |
All hail the mighty "search" feature of Arfcom! www.ar15.com/forums/topic.html?b=3&f=12&t=321288 
|
Thanks for the links, everything I needed and more.
| Run the screw in until it is flush. While holding in on the spring for the safety detent, see if the safety moves. If it does not move, back the screw out until the safety moves. Then perhaps just a little more to be safe. Don't want to prevent the safety from working. If it still moves screw it in some more until you reach the point that the safety selector doesn't move. Then back it off as indicated above. I honestly didn't notice a difference in my lowers. They have the RBPrecision LPK in each one and the trigger pull had very little travel in it berfore it fired. The screw didn't seem to make a difference, unless it only takes out the overtravel. Perhaps trigger travel on a different LPK would be longer and the screw would take up the slack. |
AR Sponsor