Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
AR Sponsor
1/18/2005 3:30:11 PM EDT
I'm gonna be getting into HP shooting, and want to know if I can tune my ejector so my empties don't rain on the next guy.  Right now they land @ 15' right and 8' behind me?
(XM193 and handloads with lower velocity (23.6 IMR4895).

1/18/2005 5:25:17 PM EDT
[#1]

Written for the AR-10, but the same logic applies...

www.armalite.com/library/techNotes/techNotesMain.htm

1/19/2005 3:38:26 AM EDT
[#2]
Thanks, That's alot of good info there!
1/19/2005 1:00:24 PM EDT
[#3]
Playing w/the ejector can be a real PITA project, and you may want do some extractor work first.  I installed Wolff heavy duty extractor springs on all 6 of my ARs, and all of them now eject either straight to the side, or slightly forward, and no more than 3-4 feet away. In fact, the only brass marks I get on the ejection hump any more is a very slight brass stain right at the very outside tip, which tells me that only an occasional case is even touching the thing.
1/19/2005 4:56:50 PM EDT
[#4]
Try here     other good AR stuff in there too www.gswagner.com/
AR Sponsor