AR Sponsor
Posted: 8/26/2004 2:30:44 PM EDT
| If I order a complete barrel from CMMG or another what other part(s) will I need to install. Should this come with a pin to index it, the nut, etc? I have a complete lower and an A3 upper/gas tube/carrier group/ch. Also do I need the vise blocks to install the barrel or can I make up a set of wood blocks and wrench it together? |
|
See the sticky at the top of this BIY Forum. All you need to know. Looks like you have all the parts to install the barrel. You need a reciever action block and a barrel nut wrench. Build your own upper - Step by step instructions - Easy! |
|
quickly to answer the question, 1) indexing pin (yes, the barrel will have the index pin.) the only time you will not see one is possibly on a really old barrel or the like. 2) wrenchs, most have the hole for the torque wrench (the square hole in the middle of the wrench) such as the multi-tool at del-ton www.del-ton.com/detail.aspx?ID=226 |
AR Sponsor