[ARCHIVED THREAD] - Surefire L72 Zeroing

Posted: 10/27/2002 6:17:19 PM EDT

I bought a surefire L72 and mounted it in a surefire M951P. I then mounted the unit to the RIS on my M4gery. My problem is I have used all the adjustment on the L72 and it is not close to being zeroed at any reasonable distance. Does anyone have an idea? The windage is OK, but the visible dot is 8-10" low at 100 yards.

Posted: 10/28/2002 10:02:44 AM EDT

[#1]

I DO NOT RECOMMEND MOUNTING YOUR LASER ON THE BOTTOM RAIL, AS IT IS NOT NEARLY AS SECURE AS THE TOP THREE RAIL QUADRANTS. I SUGGEST THAT YOU SWITCH POSITIONS WITH YOUR LASER AND YOUR SUREFIRE TACTICAL LIGHT.

WES GRANT
MSTN.BIZ

Posted: 10/29/2002 12:26:06 PM EDT

[#2]

WES,

I MOVED THE L72 TO THE THREE O'CLOCK POSITION AS YOU SUGGESTED. IT HELPED DRAMATICALLY WITH MY ZEROING TROUBLE.

THANKS

Posted: 11/3/2002 6:46:31 PM EDT

[#3]

HANZ,

GLAD IT WORKED OUT.

I SUSPECT THAT THE BOTTOM QUADRANT OF YOUR RAIL SYSTEM IS NOT CORRECTLY SEATED IN THE BARREL NUT INDENTATIONS.

THE ALL CAPS ARE A NICE TOUCH, TOO.

WES GRANT
MSTN.BIZ

Posted: 11/7/2002 6:02:40 PM EDT

[#4]

WES,

YOU WERE ABSOLUTELY CORRECT! THE LOWER RAIL WAS NOT SEATED CORRECTLY.

YOUR GOOD ADVICE AND FAST FRIENDLY SERVICE IS PRECISELY THE REASON I HAVE, AND WILL CONTINUE TO, CONDUCT BUSINESS WITH YOU.

THANKS AGAIN

[ARCHIVED THREAD] - Surefire L72 Zeroing

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Surefire L72 Zeroing

[ARCHIVED THREAD] - Surefire L72 Zeroing