AR Sponsor
Posted: 11/11/2003 7:43:41 PM EDT
Many LE/Mil folks can’t just dismantle their duty weapons to add a sling adapter to their M-4’s without clearing a bureaucratic gauntlet. Because of this, we developed a version of the Burnsed Loop which attaches with only an allen wrench. This one beats zip ties by a mile and is or off the weapon in two minutes with no red tape involved. We call it the EZ Mount Burnsed Loop. Opinions welcome! |
|
Thanks for the feedback! A couple more pics: [img]http://a9.cpimg.com/image/0B/63/26080779-8fa9-02000180-.jpg[/img] [img]http://a3.cpimg.com/image/8D/5F/26080653-7327-02000180-.jpg[/img] As you can see in the photo, the stock stops about 1/4" short of fully collapsing. Do y'all think that is a problem? |
|
Quoted: As you can see in the photo, the stock stops about 1/4" short of fully collapsing. Do y'all think that is a problem? Not at all! It's a nice option, rather than removing a post ban faux collapsible stock (a feature that I don't otherwise desire to remove! sincerely, "Stuck in NY") It is also reversible! Does it freely swivel underneath? Or would I have to disconnect the swivel to move it to the other side of the rifle? So....Where do I order it? |
|
The swivel stud is designed to rotate very little so that the swivel cannot rotate down and hinder access to the grip. You would have to unhook the swivel to move it to the other side. These are not a catalog item yet but Lynn in our shop can hook you up. They are $55 including the Mil-spec swivel. southern [url]www.danieldefense.com[/url] |
AR Sponsor