AR Sponsor
Posted: 4/26/2017 7:41:28 PM EDT
|
Was there a TA33 made specifically for mounting on carry handles? I ask because I have one that has a single mounting hole. Most of the current mounts (both from Trijicon and other companies) have dual mounting holes.
Appreciate any info. ETA: if worse come to worse, I could always have my very competent local smith drill and tap the built in spacer with two holes. |
|
Quoted:
Was there a TA33 made specifically for mounting on carry handles? I ask because I have one that has a single mounting hole. Most of the current mounts (both from Trijicon and other companies) have dual mounting holes. Appreciate any info. ETA: if worse come to worse, I could always have my very competent local smith drill and tap the built in spacer with two holes. The older compact ACOGS only had one hold and the bases were like 1.4" or 1.5" long. The newer compact ACOGS have three holes. The one in the center and two on each side. The bases are like 1.6" long. The ADM has holes that will attach via one screw or two screws depending on which ACOG you have. The larue uses one screw hole. The SLR uses one screw hold and can be purchased with the 1.5" base or the 1.6" base. |
|
Quoted:
The older compact ACOGS only had one hold and the bases were like 1.4" or 1.5" long. The newer compact ACOGS have three holes. The one in the center and two on each side. The bases are like 1.6" long. The ADM has holes that will attach via one screw or two screws depending on which ACOG you have. The larue uses one screw hole. The SLR uses one screw hold and can be purchased with the 1.5" base or the 1.6" base. Quoted:
Quoted:
Was there a TA33 made specifically for mounting on carry handles? I ask because I have one that has a single mounting hole. Most of the current mounts (both from Trijicon and other companies) have dual mounting holes. Appreciate any info. ETA: if worse come to worse, I could always have my very competent local smith drill and tap the built in spacer with two holes. The older compact ACOGS only had one hold and the bases were like 1.4" or 1.5" long. The newer compact ACOGS have three holes. The one in the center and two on each side. The bases are like 1.6" long. The ADM has holes that will attach via one screw or two screws depending on which ACOG you have. The larue uses one screw hole. The SLR uses one screw hold and can be purchased with the 1.5" base or the 1.6" base. |
AR Sponsor