AR Sponsor
Posted: 12/22/2015 7:54:38 PM EDT
|
The box lid says 3 “snaps” for the QRP2 mount and the paper instruction manual says 2.
What is the correct number of “snaps” 
|
|
Quoted:
This. I use some downward pressure and snap three times. It's how .mil told me to do it years ago.  Quoted:
Quoted:
None, I press down while turning as hard as I can. If not it'll loosen up This. I use some downward pressure and snap three times. It's how .mil told me to do it years ago. This. Press down while twisting and get all the movement out. |
|
IMO, use the QRP a bit before you spend more on a mount. When I bought my PRO I was budgeting to get a Wilcox or other mount to replace all or part of the QRP because everyone said the stock mount was terrible. Once I got it I realized there is absolutely nothing wrong with the QRP mount.
YMMV of course, but that's what I found. |
|
Quoted:
IMO, use the QRP a bit before you spend more on a mount. When I bought my PRO I was budgeting to get a Wilcox or other mount to replace all or part of the QRP because everyone said the stock mount was terrible. Once I got it I realized there is absolutely nothing wrong with the QRP mount. YMMV of course, but that's what I found. I tend to agree. $75 for more ammo or strippers. |
AR Sponsor