AR Sponsor
Posted: 5/2/2015 3:34:24 PM EDT
|
Just opened a new T-2 micro and noticed the front objective lens looks extremely canted. I know the Aimpoint FAQ talks about: "My objective lens is a little bit inclined!" This is not a broken sight! The front lens is a little bit inclined due to the fact the diode is not located in the centre of the sight but it might be located either in the roof part or the lower part of the sight depending on the model. The lens and the diode are in line with one and other. But this looks to be extreme IMO. Anyone else have the same thing going on with their T-2? |
|
Quoted: You appear to have answered your own question. Quoted: Quoted: Quoted: How does it work? Although unmounted, the dot appears to be centered. What a stunning observation. Anyone who actually owns a T-2 notice the same? |
|
It's intentional. From the Aimpoint FAQ:
My objective lens is a little bit inclined!
This is not a broken sight! The front lens is a little bit inclined due to the fact the diode is not located in the centre of the sight but it might be located either in the roof part or the lower part of the sight depending on the model. The lens and the diode are in line with one and other. Since the tube is so short on the H1, T1, and T2, the angle is more extreme than it is on their other models. |
|
Quoted:
What a stunning observation. Anyone who actually owns a T-2 notice the same? Quoted:
Quoted:
Quoted:
Quoted:
How does it work? Although unmounted, the dot appears to be centered. What a stunning observation. Anyone who actually owns a T-2 notice the same? Good on you for apologizing to someone who answered your question that could have been answered with a simple search. Oh, wait... 
|
AR Sponsor