AR Sponsor
Posted: 3/18/2015 11:47:57 PM EDT
|
I just got my hands on this set (link below) but I did not get the tools with them so I can't make any tweaks. I have a few hex keys and some torx but none are quite right and I don't want to strip the bolts. Can anybody that has these tell me the three exact tools I need to get for this please?
http://www.primaryarms.com/Primary_Arms_Advanced_Microdot_with_Removable_Base_p/rfpaabmdads.htm Thanks! |
|
Quoted:
I just got my hands on this set (link below) but I did not get the tools with them so I can't make any tweaks. I have a few hex keys and some torx but none are quite right and I don't want to strip the bolts. Can anybody that has these tell me the three exact tools I need to get for this please? http://www.primaryarms.com/Primary_Arms_Advanced_Microdot_with_Removable_Base_p/rfpaabmdads.htm Thanks! There should have been two torx wrenches in the MDADS box. Check under the foam. Email me if they are not there and I will send you a set today. |
|
Quoted:
There should have been two torx wrenches in the MDADS box. Check under the foam. Email me if they are not there and I will send you a set today. Quoted:
Quoted:
I just got my hands on this set (link below) but I did not get the tools with them so I can't make any tweaks. I have a few hex keys and some torx but none are quite right and I don't want to strip the bolts. Can anybody that has these tell me the three exact tools I need to get for this please? http://www.primaryarms.com/Primary_Arms_Advanced_Microdot_with_Removable_Base_p/rfpaabmdads.htm Thanks! There should have been two torx wrenches in the MDADS box. Check under the foam. Email me if they are not there and I will send you a set today. I looked in all the foam. I bought the mount and scope on the equipment exchange here so I think the seller just didn't include them. I can pick them up if you can't send for that reason. I don't want to take advantage. I just need to know the two torx sizes for the scope and the hex size for that mount please. If you can send them that would be amazing but I understand if you can't. |
|
Quoted:
I looked in all the foam. I bought the mount and scope on the equipment exchange here so I think the seller just didn't include them. I can pick them up if you can't send for that reason. I don't want to take advantage. I just need to know the two torx sizes for the scope and the hex size for that mount please. If you can send them that would be amazing but I understand if you can't. Quoted:
Quoted:
Quoted:
I just got my hands on this set (link below) but I did not get the tools with them so I can't make any tweaks. I have a few hex keys and some torx but none are quite right and I don't want to strip the bolts. Can anybody that has these tell me the three exact tools I need to get for this please? http://www.primaryarms.com/Primary_Arms_Advanced_Microdot_with_Removable_Base_p/rfpaabmdads.htm Thanks! There should have been two torx wrenches in the MDADS box. Check under the foam. Email me if they are not there and I will send you a set today. I looked in all the foam. I bought the mount and scope on the equipment exchange here so I think the seller just didn't include them. I can pick them up if you can't send for that reason. I don't want to take advantage. I just need to know the two torx sizes for the scope and the hex size for that mount please. If you can send them that would be amazing but I understand if you can't. Will absolutely send them. PM or email me your info. Will include thread locker. Use the small end of the wrench so you don't over tighten. |
|
Quoted:
Will absolutely send them. PM or email me your info. Will include thread locker. Use the small end of the wrench so you don't over tighten. Quoted:
Quoted:
Quoted:
Quoted:
I just got my hands on this set (link below) but I did not get the tools with them so I can't make any tweaks. I have a few hex keys and some torx but none are quite right and I don't want to strip the bolts. Can anybody that has these tell me the three exact tools I need to get for this please? http://www.primaryarms.com/Primary_Arms_Advanced_Microdot_with_Removable_Base_p/rfpaabmdads.htm Thanks! There should have been two torx wrenches in the MDADS box. Check under the foam. Email me if they are not there and I will send you a set today. I looked in all the foam. I bought the mount and scope on the equipment exchange here so I think the seller just didn't include them. I can pick them up if you can't send for that reason. I don't want to take advantage. I just need to know the two torx sizes for the scope and the hex size for that mount please. If you can send them that would be amazing but I understand if you can't. Will absolutely send them. PM or email me your info. Will include thread locker. Use the small end of the wrench so you don't over tighten. Pm sent. Thank you! |
AR Sponsor