AR Sponsor
Posted: 8/28/2011 9:27:42 AM EDT
| NM as Vortex quickly responded to the other thread. Thanks. |
|
Are you sure that you are using the correct screws? There are two different lengths depending on which base you are using. If you are using the lower 1/3 co-witness spacer then you need to use the longer screws, but if you aren't using the spacer (absolute co-witness or low mount) then you will use the shorter screws. If you try to use the longer screws with the low mount or absolute co-witness mount the screws will bottom out in the holes before it tightens the mount all the way and the sight will be a little loose. Hopefully this helps. If I'm misunderstanding please let me know. We will definitely make sure that you get taken care of whatever the case is. Sam |
AR Sponsor