AR Sponsor
Posted: 6/17/2010 7:52:05 PM EDT
My eotech died today it's a 512 and a little rubber thing fell out of the bat compartment  anyone else have this problem?
|
|
Quoted:
My eotech died today it's a 512 and a little rubber thing fell out of the bat compartment anyone else have this problem?Yes I did and it was one I bought off EE. Go here: http://www.eotech-inc.com/raform.php Fill out a RA - usually it's $58 to rebuild them. For whatever reason, they did mine for free. 2 weeks it was back in my hand - oh and my reticle was FUBAR as well. Typicaly it's 2 years or less covered by warranty. Sure - Aimpoint has a lot of advantages; however, my eyes just like the Eotech reticle. I had 2 Aimpoints and couldn't get used to them, so off to EE they went. I may try a T1 on a build in the future, but for now, it's Eotech. |
| If you still have bolth black spacer and the two batt springs take the springs carefullyout of the spacers and gently pull on each spring from bolth sides with you fingers streaching the spring slightly. Put it back toghther and chech it. Also be aware when changing batt in the field the black spacers can stick to the batt when removed |
|
another member recommended this website
i have not bought from them but they appear to have replacement eotech parts cheap http://www.lonestarpse.com/eotechparts.html |
|
Quoted:
If you still have bolth black spacer and the two batt springs take the springs carefullyout of the spacers and gently pull on each spring from bolth sides with you fingers streaching the spring slightly. Put it back toghther and chech it. Also be aware when changing batt in the field the black spacers can stick to the batt when removed This is what I did to mine. My springs had a fair amount of corrosion on them so I brushed them with CLP and a SS brush. |
AR Sponsor