AR Sponsor
Posted: 1/22/2008 7:40:22 AM EDT
| I tried to get through alot of posts and threads before I decided to ask this question. I am running a Trijicon tri power using an Aimpoint mount on an M4. I recently picked up a used Aimpoint 3X with the twist mount. Upon mounting it I found it was either canted forward or well below center line of the CCO. I did a little testing an found that with the 3X leaned back in the mount I am getting the lower third Co-witness I am after. Question is what is the problem. will a set of Larue mounts for both pieces fix the problem or is there a possiblity of the 3x being tweaked? Thanks in advance |
AR Sponsor