AR Sponsor
Posted: 7/29/2005 4:10:14 PM EDT
| I want a Green laser to go on an AR. Who has them? |
|
www.bemeyers.com/Lasers/ supplier to military and especially special forces |
| Yes it does, but they are not your normal type of elevation and windage adjustments. You have to take off the front cap of the laser. Then, on the main body of the housing, there are 4 set screws. To adjust the laser, take the allen wrench supplied with the laser, and loosen the set screws in the direction you want to move the beam, then you tighten down the set screws on the other side. It took me about 5 or 10 miutes to get the beam aligned with the iron sights and the dot from my red dot scope. So now my laser, iron sights and red dot scope are all aligned at 15 yds. Just a note. You also get 4 spare set screws just incase you some. |
AR Sponsor