AR Sponsor
Posted: 1/29/2016 7:42:26 AM EDT
| I am going to use the NFA lower when it's is available I am needing to know as for which upper parts will interchange barrels bolts uppers . Was told I could use ar15 parts if so I have a lot of parts laying around from trades and changes . Thanks for any and all help |
|
Quoted:
Hold open is not an issue what about barrels and bolts buffers are there a tutorial somewhere that helps with construction thanks Of course you need a 9mm caliber barrel, a specific 9mm ar bolt ( look for one ramped for a std AR hammer). If you are going to use glock magazines the bolt needs the Glock cut in it. You want the heaviest buffer and extra power spring. At least 6 oz up to preferably 8.5 oz. |
|
Here is a good read on planning a 9mm build...
http://www.pariaharms.com/AR9.php |
|
Quoted:
Thanks for helping the site won't upload Try this http://www.pariaharms.com/AR9.php Or this http://www.pariaharms.com/AR9.php |
|
Here is one currentlyon bo though
http://micromoa.com/nitrided-14-5-9mm-ar-barrel-threaded-1-2-28-750dia/ |
AR Sponsor