AR Sponsor
Posted: 4/12/2014 3:10:38 PM EDT
|
RRA / COLT
YES Geissele SD3G ARGOLD 5.56 NO CMMG RAMPED YES Geissele SSA / SSA-E POF Drop In Single Stage Module KAC 2 Stage JP Enterprises Comp Trigger RRA Nat'l Match NO Geissele SD3G Geissele Nat'l Match ARGOLD 5.56 Timney Seeing as though I bought 2x $200 dollar triggers before I found one that works, I think this list is appropriate. Just a memo for those that may not know but some hammers in trigger groups lack the requisite height to catch on the disconnector while cycling the bolt with the trigger held back. Most often they will catch on the hammer notch just fine but a function test will reveal the disconnector issue. Feel free to add to this and I will update the original post |
|
Quoted:
That's because you basically turned your RRA into a CMMG. Quoted:
Quoted:
well, my ADCO ramped RRA did not work well with the SD3G or Timney. Works fine with KAC 2 stage Ok, well now you know my CMMG did not work with TImney but does work with KAC |
| The Geissele Nat Mat is also a no go with a cmmg ramped bolt, I modified my RRA bolt to be slightly ramped for my ar45 and it runs like a rock star with my SD3G, I will eventually run a SSA with the ramped CMMG. You can prob bet too that the S3G is also a no go with the ramped bolts |
AR Sponsor