AR Sponsor
Posted: 4/3/2014 10:57:45 AM EDT
| Anyone know of a cleaning rod guide for an AR15 22LR Dedicated Upper? Went to the manufacturer of the upper, JP Rifles (Nordic Components bolt/carrier); they make them for AR15, not for 22LR ded. uppers. |
|
Hey Reb, no need to over think this one as you can use any
AR15 bore guide that has a beveled chamber face like this one by Satern: http://www.midwayusa.com/product/325777/satern-bore-guide-with-solvent-port-ar-15-65-grendel?cm_vc=ProductFinding I use mine with the gun broken open and placed in a cleaning stand. Apply gentle pressure on the guide in the forward direction to keep the beveled portion against the breech, then send down the rod. This method works well even if the centerfire chamber piece doesn't enter the rimfire chamber, just keep forward pressure while sending the guide and you'll be good to go. Ted |
|
I just had a thought about your upper and, that is, if it
lacks a MilSpec bolt raceway you'll be out of gas no matter what guide you might use. If the upper by JP uses a bolt other than Cienner you should do some more research to ensure the raceway is capable of taking a bore guide. Ted |
AR Sponsor