AR Sponsor
Posted: 2/16/2013 6:25:01 PM EDT
1" barrel matches nicely with the Spectre. Total weight as shown: 6.73lbs. Without Optics, Can, and Bipod: 4.37lbs.
|
|
Quoted: Looks great! Give us a range report. Dave N  Finally got a chance to take her to the range. I used my Spikes bolt with the collar that came with the FLW Barrel. I also used a Burris TAC30(LOVE the reticle) with a ADM Recon-X mount. Accuracy was on par with my Spikes ST-22 LW barrel. No FTF, FTE, etc with CCI SV, Winchester Xperts, but lots of FTF, FTE with Remington Subsonics. It took me awhile to get my Spikes ST-22 to run almost reliably...while the TACCOM build is trouble free from the start. The weight, and TROUBLE FREE feeding makes the TACCOM FLW build a pleasure to shoot. My next project is to build up the ULW barrel that I bought at the same time with the FLW barrel....I couldn't decide which barrel to purchase...so I purchased both. So far I am very pleased with my purchase. Big thumbs up for TACCOM barrels!! |
|
Here is a video of my first 25 shots with the build. I boresighted the scope(Burris TAC30 1-4x; ADM Recon-X Mount) before going to the range so it was very close to zero. CCI Standard Velocity, New Frontier Armory Polymer Lower, 50 yards, suppressed(SWR Spectre I), bench rest with a Atlas bipod, stool was a little rocky. I used 2 BDM mags, one 10 rounds and the other 15 rounds, so there is a mag change in the middle of the video. The trigger on the NFA lower is crisp, but pull was a bit heavier than what I used to...yes..I'm a puss. Camera(with built in mic) was left of the ejection port...about 3 feet and a little forward. I've very pleased with the results. Folks that shoot suppressed...TACCOM Threaded Barrel is a must have!! I could not embed, so here is a direct link to the video: https://vimeo.com/62474115 Another 23 rounds: http://vimeo.com/62503660 |
AR Sponsor