AR Sponsor
Posted: 4/9/2009 4:16:29 PM EDT
|
Let me first start off by apologizing, as I'm certain this has more then likely come up in the past, could someone perhaps give me some pointers or perhaps point me towards the thread that shows how to take the kits apart.
Thanks in advance, |
|
Quoted:
Gently spread the rails and unclip the chamber adapter or collar, as the case may be. the bolt will come off under pressure of the recoil spring. If you need to pull out the firing pin or extractor, a roll pin punch of the proper size is needed. Great info, thank you for your help. I'm supprised noone has done a detailed breakdown of this. |
| I had a site linked that told you how to smooth it out, but I don't remember if it told you exactly how to tear it down. Unfortunately it continues to show that it has exceeded its bandwidth, so I am not sure when you can get to it. Try here |
|
Quoted:
I had a site linked that told you how to smooth it out, but I don't remember if it told you exactly how to tear it down. Unfortunately it continues to show that it has exceeded its bandwidth, so I am not sure when you can get to it. Try here Thank you very much for the link, I keep trying it and hope it starts working 
|
AR Sponsor