AR Sponsor
Posted: 5/24/2005 10:13:08 AM EDT
|
Hey All, I am new to the forum, as well as relatively new to the world of pistol caliber AR's. I have put a few thousand rounds through my AR, which I purchased used. It always operated flawlessly. Recently, I have been having a problem. It chambers a round, but when the trigger is squeezed, I hear and feel the hammer drop, but no boom. I clear it, and find 2 things, 1, no dent in the primer, and, the round is loose, does not draw out of the chamber with the bolt. I have broken it down, the firing pin and spring are in good shape, the hammer is as well. I have a telescoping stock and wonder if it has backed off and is not allowing the buffer spring to hold the bolt tight against the chamber. I was wondering if any of you have experienced something similar, and if so, what was done to correct the problem? Thnaks for any help in advance. |
AR Sponsor