AR Sponsor
Triggered [Formerly Partisan] Talk (Page 3 of 40)
|
Originally Posted By heavyduty: I’m wondering if adding a couple of setscrews through the bottom plate would allow tensioning the cassette up against the pins and make it so the anti-walk pins aren’t needed. I have a cassette trigger like that. They have a pin solution coming out soon. |
Member
Joined:
Dec 2023
Posts:
6187
EE: 100% (7)
USA
|
Originally Posted By heavyduty: Can you expand on this? Originally Posted By heavyduty: Originally Posted By JTX23: They have a pin solution coming out soon. Can you expand on this? In a few weeks, hopefully, Partisan is releasing a version that takes standard trigger pins. It has internal clips to hold the grooves on the pins. HOPEFULLY it's available as an upgrade to existing triggers, and not a different model of trigger altogether. Hopefully it comes out at the same time as their mil spec looking selector, and USGI profile trigger. |
|
Originally Posted By ELittlefield: In a few weeks, hopefully, Partisan is releasing a version that takes standard trigger pins. It has internal clips to hold the grooves on the pins. HOPEFULLY it's available as an upgrade to existing triggers, and not a different model of trigger altogether. Hopefully it comes out at the same time as their mil spec looking selector, and USGI profile trigger. Originally Posted By ELittlefield: Originally Posted By heavyduty: Originally Posted By JTX23: They have a pin solution coming out soon. Can you expand on this? In a few weeks, hopefully, Partisan is releasing a version that takes standard trigger pins. It has internal clips to hold the grooves on the pins. HOPEFULLY it's available as an upgrade to existing triggers, and not a different model of trigger altogether. Hopefully it comes out at the same time as their mil spec looking selector, and USGI profile trigger. It is listed under parts and accessories and not another trigger so I hope they are. @Ben Can you confirm these parts (the pins and selector) will be available as part orders that we can order to upgrade the Disrupters? |
|
Originally Posted By JTX23: It is listed under parts and accessories and not another trigger so I hope they are. @Ben Can you confirm these parts (the pins and selector) will be available as part orders that we can order to upgrade the Disrupters? That is correct. |
Twitter/Instagram: benunsuppressed
https://americanpioneercorps.org
https://americanpioneercorps.org
|
Originally Posted By Ben: That is correct. Originally Posted By Ben: Originally Posted By JTX23: It is listed under parts and accessories and not another trigger so I hope they are. @Ben Can you confirm these parts (the pins and selector) will be available as part orders that we can order to upgrade the Disrupters? That is correct. Awesome, thank you |
|
Originally Posted By JTX23: This is what bitdefender is flagging on cloak's site. Not sure what it is because for some reason it doesn't state the issue like it normally does. https://www.ar15.com/media/mediaFiles/441198/Screenshot_2025-12-17_162754_png-3677228.JPG I run Bitdefender but didn't get that warning on Cloak's site. Weird. I do wish Cloak would provide an update now that it has been 3 days. My bank account has been debited. |
Member
Joined:
Jul 2025
Posts:
321
EE: 100% (73)
TN, USA
|
Originally Posted By Kurzhaar1: I run Bitdefender but didn't get that warning on Cloak's site. Weird. I do wish Cloak would provide an update now that it has been 3 days. My bank account has been debited. Sounds like you're not the only one. They only sell like three things, and two of those are rifles that are pre-order only. The triggers are the only thing they advertise as ship-ready. We should have seen some kind of movement so far. I really hope @PartisanTriggers vetted these guys before advertising for them. Looks like they're on-boarding more. I'm not thrilled to see that Performance Triggers is on that list, because it would suggest that not a lot of care is being taken in selecting vendors. |
Member
Joined:
Dec 2023
Posts:
6208
EE: 100% (7)
USA
|
Originally Posted By heavyduty: I’m hoping Partisan can come up with a workable drop-in 3P for AR22s, I know they are on the list. I also hope Partisan can be made to work with AR22s, but you can also check out the Atrius/Rise Armament Rave 140 combo. Bore Buddy certifies that combination to work with AR22s, and I can confirm that. It's the most reliable 22 configuration I've found, and I've tried most of them. You do still need a trip to make that work. |
|
Originally Posted By lugnutwrench2: Sounds like you're not the only one. They only sell like three things, and two of those are rifles that are pre-order only. The triggers are the only thing they advertise as ship-ready. We should have seen some kind of movement so far. I really hope @PartisanTriggers vetted these guys before advertising for them. Looks like they're on-boarding more. I'm not thrilled to see that Performance Triggers is on that list, because it would suggest that not a lot of care is being taken in selecting vendors. Originally Posted By lugnutwrench2: Originally Posted By Kurzhaar1: I run Bitdefender but didn't get that warning on Cloak's site. Weird. I do wish Cloak would provide an update now that it has been 3 days. My bank account has been debited. Sounds like you're not the only one. They only sell like three things, and two of those are rifles that are pre-order only. The triggers are the only thing they advertise as ship-ready. We should have seen some kind of movement so far. I really hope @PartisanTriggers vetted these guys before advertising for them. Looks like they're on-boarding more. I'm not thrilled to see that Performance Triggers is on that list, because it would suggest that not a lot of care is being taken in selecting vendors. Yea, I would say that lazyengineer is a reliable guy. His experience with Performance Triggers was pretty bad. Thank you for posting that link. Good to Know they are not Good to Go |
| My Partisan was purchased at BattleHawk on Monday the 15th. Shipped yesterday with ETA of Monday the 22nd. |
NRA Life Member
I can see where you're coming from, 'cause I know where you've been and I can see where you're going 'cause I can see the direction you're headed in. I just don't know where the hell you're at right now.
I can see where you're coming from, 'cause I know where you've been and I can see where you're going 'cause I can see the direction you're headed in. I just don't know where the hell you're at right now.
Member
Joined:
Dec 2023
Posts:
6213
EE: 100% (7)
USA
|
Some general musings on my process, Battle Hawk will send many emails updating the process as the order goes through their system. Mine shipped in two days after getting the notification that mine moved to the shipping department. But UPS did some kind of oops, and had to correct with a reroute. Looks like Christmas eve for me. Battle Hawk appears to ship from Des Moines. I was a little disappointed about the lack of understanding what methods might be used for the carrier. I am very rural, so knowing the shipping carrier helps me how to address the shipping fields. I guessed USPS, and mine is doing the UPS Surepost, so technically I guessed correctly. Knowing this might help others with complicated shipping reception methods. The Battle Hawk ordering process was a little kludgy, but it works. For those who have not perused the Parisian website, they do have a list of "big box" suppliers listed as coming soon. The only name I recognized is OpticsPlanet. They are certainly a supplier that should help this process for many. Guessing once these hit the tubes, finding them in stock might be challenging. I know Partisan has stated no worries here, but we shall see. The document page on the Partisan website is a little thin for what they show as accessible, but you can review the patent. looking forward to the Attorneys on the Youtube who are deep diving the Rare Breed situation to perhaps throw more light on this trigger, in comparison. |
Northern born and Southern Bred
Member
Joined:
Jul 2025
Posts:
323
EE: 100% (73)
TN, USA
|
Originally Posted By Kurzhaar1: I run Bitdefender but didn't get that warning on Cloak's site. Weird. I do wish Cloak would provide an update now that it has been 3 days. My bank account has been debited. Originally Posted By Kurzhaar1: I run Bitdefender but didn't get that warning on Cloak's site. Weird. I do wish Cloak would provide an update now that it has been 3 days. My bank account has been debited. FYI: Originally Posted By lugnutwrench2: They said they're hoping to get caught up with shipping by mid next week, so a little disappointing if you bought one of these to put under the tree, but at least they were responsive. I was able to quickly get to a real person. I trust they're working overtime to accommodate the burst in demand. I no longer have any doubts about them. |
|
Yesterday, I ordered a Partisan from one of the vendors who apparently has stock, and is a certified retailer according to Partisan: https://www.artakedowntool.com/products/partisan-forced-reset-drop-in-cassette-trigger-frt-ar-15-platform-usa-made Price is $255 after discount code (and no tax): LXZ-NEWF4DK |
|
Originally Posted By lugnutwrench2: FYI: Originally Posted By lugnutwrench2: Originally Posted By Kurzhaar1: I run Bitdefender but didn't get that warning on Cloak's site. Weird. I do wish Cloak would provide an update now that it has been 3 days. My bank account has been debited. FYI: Originally Posted By lugnutwrench2: They said they're hoping to get caught up with shipping by mid next week, so a little disappointing if you bought one of these to put under the tree, but at least they were responsive. I was able to quickly get to a real person. I trust they're working overtime to accommodate the burst in demand. I no longer have any doubts about them. Thanks for the info. |
|
Originally Posted By lugnutwrench2: FYI: They said they're hoping to get caught up with shipping by mid next week, so a little disappointing if you bought one of these to put under the tree, but at least they were responsive. I was able to quickly get to a real person. I trust they're working overtime to accommodate the burst in demand. I no longer have any doubts about them. I hope they’re doing first in first out - my order was in at 8AM Central Monday. |
|
Holy efficient UPS! Attached File |
"My friend, you would not tell with such high zest
To children ardent for some desperate glory,
The old Lie: Dulce et decorum est
Pro patria mori." -Wilfred Owen
To children ardent for some desperate glory,
The old Lie: Dulce et decorum est
Pro patria mori." -Wilfred Owen
|
Originally Posted By Bye_Felicia: Holy efficient UPS! https://www.ar15.com/media/mediaFiles/40084/632_jpg-3677845.JPG |
|
Originally Posted By jaqufrost: Nice! Post some video when you shoot it! Originally Posted By jaqufrost: Originally Posted By Bye_Felicia: Holy efficient UPS! https://www.ar15.com/media/mediaFiles/40084/632_jpg-3677845.JPG I went and test fired a magazine in the backyard. Ran like a champ with a 16in and H3 buffer. Install was a breeze. Closing requires a bit of finessing the upper/lower but not hard to figure out. Didn't notice any trigger slap. Pretty damn happy. |
"My friend, you would not tell with such high zest
To children ardent for some desperate glory,
The old Lie: Dulce et decorum est
Pro patria mori." -Wilfred Owen
To children ardent for some desperate glory,
The old Lie: Dulce et decorum est
Pro patria mori." -Wilfred Owen
|
Originally Posted By Bye_Felicia: I went and test fired a magazine in the backyard. Ran like a champ with a 16in and H3 buffer. Install was a breeze. Closing requires a bit of finessing the upper/lower but not hard to figure out. Didn't notice any trigger slap. Pretty damn happy. Originally Posted By Bye_Felicia: Originally Posted By jaqufrost: Originally Posted By Bye_Felicia: Holy efficient UPS! https://www.ar15.com/media/mediaFiles/40084/632_jpg-3677845.JPG I went and test fired a magazine in the backyard. Ran like a champ with a 16in and H3 buffer. Install was a breeze. Closing requires a bit of finessing the upper/lower but not hard to figure out. Didn't notice any trigger slap. Pretty damn happy. 
|
Why is the sky blue?
What makes the green grass grow?
What makes the green grass grow?
|
Originally Posted By Bye_Felicia: Holy efficient UPS! https://www.ar15.com/media/mediaFiles/40084/632_jpg-3677845.JPG Sweet! Are the pins hex or Torx? There was some gnashing of teeth about that. |
|
Ben is the LAT your design that was demoed over Memorial day? Or how would the LAT compare? I'm a connoisseur when it comes to triggers. I was pretty impressed with that trigger. So I'm holding out till u release that or the LAT. (I still use jewel triggers) Glad to see these disruptors are being well received. |
Member
Joined:
Jul 2025
Posts:
327
EE: 100% (73)
TN, USA
|
Originally Posted By JellyJugz: Ben is the LAT your design that was demoed over Memorial day? Or how would the LAT compare? I'm a connoisseur when it comes to triggers. I was pretty impressed with that trigger. So I'm holding out till u release that or the LAT. (I still use jewel triggers) Glad to see these disruptors are being well received. My trigger that was tested over Memorial Day has had some significant changes and improvements made, and will be much more expensive. When it is announced and people see why it is more expensive they'll understand and, I am certain, appreciate that it is very different. Honestly, as far as performance goes the Disruptor is very, very close to what you guys got to test Memorial Day as far as function and feel. It settles in after breaking it in at 3.75 to 4.1lbs typically. |
Twitter/Instagram: benunsuppressed
https://americanpioneercorps.org
https://americanpioneercorps.org
|
Originally Posted By USMCsilver: Yesterday, I ordered a Partisan from one of the vendors who apparently has stock, and is a certified retailer according to Partisan: https://www.artakedowntool.com/products/partisan-forced-reset-drop-in-cassette-trigger-frt-ar-15-platform-usa-made Price is $255 after discount code (and no tax): LXZ-NEWF4DK They are only giving a $15 discount with that code. |
|
I received this from Cloak today. Good afternoon, Cloak Customers! We’ve received an overwhelming number of orders for this new product, and it has temporarily exceeded our system’s capacity. Our team is working hard to get everything shipped as quickly as possible. Once your order ships, you’ll receive tracking information right away. As a small company with a limited team, we didn’t want to stay silent—we truly appreciate your patience and support during this busy time. Thank you and happy holidays! Order cancelled so some of you moved up a place today. I don't need one that bad. |
|
Originally Posted By chuck1: I received this from Cloak today. Good afternoon, Cloak Customers! We’ve received an overwhelming number of orders for this new product, and it has temporarily exceeded our system’s capacity. Our team is working hard to get everything shipped as quickly as possible. Once your order ships, you’ll receive tracking information right away. As a small company with a limited team, we didn’t want to stay silent—we truly appreciate your patience and support during this busy time. Thank you and happy holidays! Order cancelled so some of you moved up a place today. I don't need one that bad. I received the same email. |
If my wife had another baby and I was in the delivery room, I'd probably look at it and yell "welcome back bitch" and then have the hospital page Norcal. -scuba_steve
| I’m interested in hearing how these are working with 9mm blowback uppers. The heavier 9mm buffers are often longer to limit bolt stroke for the shorter 9mm cartridge and so-called M16 compatible 9mm bolts are all over the place as far as the mating surface not standardized like a 5.56 bolt carrier. |
Member
Joined:
Dec 2023
Posts:
6329
EE: 100% (7)
USA
|
Battle Hawk came through! It arrived today. My first impressions on installation and dry fire function testing: It's not as good as the Rare Breed. The trigger pull is very long, not single stage at all. It feels almost like a light double action revolver trigger. I strongly prefer the trigger pull of the Rare Breed. The selector definitely needs deeper detents. Flipping from safe to semi to FRT is gritty, and does not lock in place sharply like other high quality selectors. The right side of the selector does not have an indicator pointing to the marking on the receiver. It dry fires correctly. Racking the action in semi auto bumps the trigger forward, just like the Rare Breed, and unlike other designs like the ARC-Fire and Atrius. I'm looking forward to live firing, but my initial impressions do not say "best FRT on the market." For 66% of the price of a Rare Breed, it seems to be pretty much as good, and of course if you hate Rare Breed for their patent lawsuits you'll be delighted with this one. I'm looking forward to the mil spec clone version.  " /> " /> " /> " /> " />
|
. That's pretty good to me.
|
Originally Posted By USMCsilver: Yesterday, I ordered a Partisan from one of the vendors who apparently has stock, and is a certified retailer according to Partisan: https://www.artakedowntool.com/products/partisan-forced-reset-drop-in-cassette-trigger-frt-ar-15-platform-usa-made Price is $255 after discount code (and no tax): LXZ-NEWF4DK Have you had any shipping notice from artakedowntool.com? Ordered mine from them on the 17th and haven't had any updates. |
| Received mine yesterday from BattleHawk and replaced one of the Rare Breeds with the Partisan. I will try to get some pictures up in the next day or so. The trigger in semi is light but as Elittlefield stated it’s a bit of a long pull. My carbine setup is very similar to his. I will compare it to the other rifle I have with the Rare Breed still installed. I think I prefer the Partisan. I also didn’t use the stock selector. I used an M16 modified that I was using with the Rare Breed. For the money, I’m happy. |
NRA Life Member
I can see where you're coming from, 'cause I know where you've been and I can see where you're going 'cause I can see the direction you're headed in. I just don't know where the hell you're at right now.
I can see where you're coming from, 'cause I know where you've been and I can see where you're going 'cause I can see the direction you're headed in. I just don't know where the hell you're at right now.
|
Originally Posted By ELittlefield: Battle Hawk came through! It arrived today. My first impressions on installation and dry fire function testing: It's not as good as the Rare Breed. The trigger pull is very long, not single stage at all. It feels almost like a light double action revolver trigger. I strongly prefer the trigger pull of the Rare Breed. The selector definitely needs deeper detents. Flipping from safe to semi to FRT is gritty, and does not lock in place sharply like other high quality selectors. The right side of the selector does not have an indicator pointing to the marking on the receiver. It dry fires correctly. Racking the action in semi auto bumps the trigger forward, just like the Rare Breed, and unlike other designs like the ARC-Fire and Atrius. I'm looking forward to live firing, but my initial impressions do not say "best FRT on the market." For 66% of the price of a Rare Breed, it seems to be pretty much as good, and of course if you hate Rare Breed for their patent lawsuits you'll be delighted with this one. I'm looking forward to the mil spec clone version. Well that kida sucks. The semi auto trigger pull on the rare breed sucks, at least on mine. It's one of main reasons I never bought another one. Now that I have a ARC-fire and it works with G$ triggers, I will not go back to a shitty trigger pull. This thing does look a lot like the rare breed. I wonder how long before the get a C&D letter. 
|
Member
Joined:
Dec 2023
Posts:
6371
EE: 100% (7)
USA
|
Originally Posted By Jeeps-And-Guns: Well that kida sucks. The semi auto trigger pull on the rare breed sucks, at least on mine. It's one of main reasons I never bought another one. Now that I have a ARC-fire and it works with G$ triggers, I will not go back to a shitty trigger pull. This thing does look a lot like the rare breed. I wonder how long before the get a C&D letter. Originally Posted By Jeeps-And-Guns: Originally Posted By ELittlefield: Battle Hawk came through! It arrived today. My first impressions on installation and dry fire function testing: It's not as good as the Rare Breed. The trigger pull is very long, not single stage at all. It feels almost like a light double action revolver trigger. I strongly prefer the trigger pull of the Rare Breed. The selector definitely needs deeper detents. Flipping from safe to semi to FRT is gritty, and does not lock in place sharply like other high quality selectors. The right side of the selector does not have an indicator pointing to the marking on the receiver. It dry fires correctly. Racking the action in semi auto bumps the trigger forward, just like the Rare Breed, and unlike other designs like the ARC-Fire and Atrius. I'm looking forward to live firing, but my initial impressions do not say "best FRT on the market." For 66% of the price of a Rare Breed, it seems to be pretty much as good, and of course if you hate Rare Breed for their patent lawsuits you'll be delighted with this one. I'm looking forward to the mil spec clone version. Well that kida sucks. The semi auto trigger pull on the rare breed sucks, at least on mine. It's one of main reasons I never bought another one. Now that I have a ARC-fire and it works with G$ triggers, I will not go back to a shitty trigger pull. This thing does look a lot like the rare breed. I wonder how long before the get a C&D letter. The ARC-Fire is now my wholehearted recommendation to everyone who wants an FRT. It's good on the low end, with a decent mil spec trigger pull out of the box at 250 bucks, and it's upgradable to the best FRT trigger available for another 200-250. It also doesn't bump the trigger forward in semi. |
|
Originally Posted By heavyduty: Has anyone that received their Partisan tried it with a H2? I'm planning to put mine in a SBRed lower that shares a Crane spec gas port 10.3" and a carbine gas 14.5", it has a H2 and Sprinco blue. |
Triggered [Formerly Partisan] Talk (Page 3 of 40)
AR Sponsor