AR Sponsor
Posted: 2/21/2010 3:50:18 PM EDT
|
Well I got this piston kit at a funshow today from a dealer friend of mine, its from Brownells but looks to be a year old or so. I dont know if installed it right so I thought I would post pic to see.
God bless, Keen 
|
| The system you have is a TNW. I've been running the same system for a while now. It has functioned flawlessly for me, mileage will vary. As far as I know Brownells doesn't carry the system, but support is available from TNW firearms, should you need shims, or spacers. From the pictures it appears you have it installed correctly, but I notice you don't have a spacer between the gas piston and the op-rod. I highly recommend going to the manufacturers sight and getting the install manual. |
| Did the system not function at all, or did it short cycle? Short cycling is an indication that the gap between the piston and the op-rod needs to be adjusted. The op-rod should just be touching the bolt carrier, I for get what the tolerance is but it is listed on the install manual. |
AR Sponsor