AR Sponsor
Posted: 5/6/2014 6:15:09 PM EDT
| What can anyone tell me about 10.5 MAS Defense barrels in 5.56, any good? |
From what I've seen here people lay they are decent barrels, but I have no experience personally. My buddy just got his this week, 7.5 Melonite, and he will put it together this week to see how it shoots hopefully. The one thing that he noticed is the barrel measures 7" to the start of the threads, so his 10" rail to cover his kx3 isn't gonna work, it will completely cover it instead of sticking out slightly, which sucks for him but good for me since we're probably gonna trade rails, my 9" BAR for his 10" evolution  .
|
|
Quoted:
I bought the HBAR version of the 10.5" from them. I have had no issues. https://lh4.googleusercontent.com/-Qj-PY94uRNs/U2OVdmhmOWI/AAAAAAAAdLA/IZbuPVDtxnc/w841-h631-no/IMG_20140501_190855.jpg Nice stick. |
|
Quoted:
My 7.5 mas defense. Those four shots on the plate were shot from 200 yards. Fifth shot was just off the paper. <a href="http://s247.photobucket.com/user/mlp1911/media/TABLET-WIN_20140419_202803_zps8c143565.jpg.html" target="_blank">http://i247.photobucket.com/albums/gg148/mlp1911/TABLET-WIN_20140419_202803_zps8c143565.jpg</a> I was thinking 10.5 for accuracy but if a 7.5 gets groups like that at 200yds. I just might go with that for my first pistol build. |
|
Just bought a standard 10.5" barrel from them for a new build, because it was on sale. Govt profile, 1x7 twist.
Worked and functioned fine when I test-fired it the other day. I've heard that they have larger gas ports than usual, and it did seem to be overgassed a bit for my H2 buffer. I'm going to pick up an H3 and see if it slows down some more. |
|
Quoted: Just bought a standard 10.5" barrel from them for a new build, because it was on sale. Govt profile, 1x7 twist. Worked and functioned fine when I test-fired it the other day. I've heard that they have larger gas ports than usual, and it did seem to be overgassed a bit for my H2 buffer. I'm going to pick up an H3 and see if it slows down some more. I have their 10.5" Barrel as well, and it is definitely gassed high. It will shoot Brass fine, and at least one Steel Case (Wolf Polyformance) without issue, however, I had some problems with the other Steel Case brands. I switched to an H2 Buffer (4.5oz) which allowed my Pistol to shoot anything I put into it. However, despite the H2 buffer and a full-auto carrier as well, it was still overgassed, ejecting cases forward at around the 14:00 mark and slamming the bolt back pretty hard. I cured it completely with an Adjustable Gas Block, and my Pistol shoots smooth and has shot everything I've put through it. |
|
I just finished building 4 AR Pistols with my boys, and ended up using MAS Defense barrels on all 4.
We started out with 4 PSA stripped lowers, and then added Phase 5 pistol tubes and CMMG LPK's. After reading so many positive reviews and since they are based here in the Carolinas - I decided to go with them for the uppers - VERY HAPPY I DID! Here are a few pics of the progress: |
|
Maybe you could just fab up the parts with that 10" rail and the kx3', I wouldn't mind seeing how that looks.
Quoted:
From what I've seen here people lay they are decent barrels, but I have no experience personally. My buddy just got his this week, 7.5 Melonite, and he will put it together this week to see how it shoots hopefully. The one thing that he noticed is the barrel measures 7" to the start of the threads, so his 10" rail to cover his kx3 isn't gonna work, it will completely cover it instead of sticking out slightly, which sucks for him but good for me since we're probably gonna trade rails, my 9" BAR for his 10" evolution . |
|
I've taken my basic 10.5" to the range a couple of times now, and it has proved reliable and accurate. No complaints and I think i'd order from them again in a heartbeat.
Speaking of barrel markings though, mine came completely unmarked. No caliber, no twist, no nothing. Just a couple of proof marks. Since I completely covered it with a rail and because it was just one of their basic M4 profile 1x7 barrels I didn't much care, but I did think it was a bit odd - I just have to take their word for it that they sent me the right barrel, I guess. Had I ordered a more specialty barrel and it came unmarked I think I would have been unhappy. |
| It seems everyone is happy with the 10.5 inch MAS barrels but how about their 7.5 inch barrels? I'm considering one of their 7.5 inch complete upper assemblies and just wonder if they have them sorted out. From what I've read, the 7.5 inch pistols used to be kind of a pain to get functioning 100% but apparently most everyone has them sorted out now. Are the 7.5 inch MAS barrels/upper assemblies good to go? |
|
Quoted: Just checked out their site, lots of positive reviews and they are having a sale through memorial day |
|
Curious about your comment, I contacted them today. I spoke with Mario, he sent me a copy of the email they send out confirming the purchase order. He explained that they strive for 5 star level service and they want to know and fix any problems, issues or concerns. He seemed to be a straight shooter, gonna give them a try.... Here is the text from the email below.....
Thank you for your purchase with MAS Defense at http://shop.masdefense.com. Please take a moment to share your thoughts on the item(s) you purchased. We have provided a link below each item for you to submit your rating and review. If you feel anything deserves less than a 5 Star rating, please contact us BEFORE leaving your review. Please use the name on your invoice. Your review will not be posted if we can not find your invoice. Once you leave a review, you will be entered into our FREE Monthly Drawing. Previous drawings included Free BCGs, Free $100 Store Credits, Free Lower Parts Kits and a $150 mystery prize. Please go to MASDefense.com for more details. |
|
Quoted:
One word of warning about their reviews. If you want to submit one with less than 5 stars, you have to email them for approval first. With that said, I have two of their barrels and have no complaints thus far... Quoted:
Quoted:
Just checked out their site, lots of positive reviews and they are having a sale through memorial day That is actually how most online reviewing software works. I've installed enough of it to know ;-) All reviews go through an approval / review process prior to going live. Some choose to let all go through, while others choose to review each and every one. |
AR Sponsor