AR Sponsor
Posted: 3/27/2014 11:16:10 PM EDT
| Ok guys I have just acquired my DPMS Recon .308 & I really like this rifle. My only concern is the trigger pull being a hefty 6lbs average. What is the best trigger upgrade that won't cost me a ton of cash? Anyone else owning a Recon .308 that can chime in here would be much appreciated. Thanks. |
| I have a LMT MWS and I ordered a JP light weight trigger spring kit for around $10-15 from brownells I think. I only used one of the springs supplied. I can't remember if it was the trigger spring or hammer spring. The main concern is light primer strikes. Look into it. Also look into 10 minute trigger job. |
|
Quoted:
I have a LMT MWS and I ordered a JP light weight trigger spring kit for around $10-15 from brownells I think. I only used one of the springs supplied. I can't remember if it was the trigger spring or hammer spring. The main concern is light primer strikes. Look into it. Also look into 10 minute trigger job. I did the 10 min trigger job on an ar15 and a BR308. It makes a huge difference coupled with the JP lightweight springs. I drank the koolaid and put Geisslee (sp) triggers on both rifles SSA, SSAE and am happy. $200 a trigger though. Still learning the 2 stage pull. |
| I looked up the Jard triggers and from what I am hearing and have seen they are great triggers. You can get a 1.5lb trigger for $170 & that is with the Milspec springs. I think I am going to go with the Jard myself which is made by Brownell's if I'm not mistaken. Anyone run the Jard triggers? |
AR Sponsor