[ARCHIVED THREAD] - Building a dedicated 50 lower which trigger?

Posted: 8/12/2013 5:10:31 AM EDT

I am building a dedicated 50 lower and I have read you need a heavier trigger and spring. Which parts should I put in that will work with all manufacturers? Would the Saftey Harbor trigger and spring be ok for all or is there something better READ: easier to buy through Brownells... Right now I have just a standard parts kit.

Thanks

Posted: 8/12/2013 6:57:07 AM EDT

[#1]

One of these...
http://www.brownells.com/rifle-parts/triggers-bottom-metals/hammer-parts/hammer-springs/ar-15-m16-extra-power-hammer-spring-prod19916.aspx?avs|Make_3=AR-15/M4&avs|Manufacturer_1=WOLFF

WOLFF - AR-15/M16 EXTRA-POWER HAMMER SPRING 969-000-100WB Hammer Spring Mfr Part: 30093 for the princely sum of $4.99

Posted: 8/12/2013 7:32:57 AM EDT

[#2]

I have the wolff extra power hammer spring in mine. It works, but I would like to buy something nicer.

Posted: 8/12/2013 9:00:07 AM EDT

[#3]

Heavier hammer spring, not trigger spring.

Posted: 8/13/2013 5:26:41 AM EDT

[#4]

Yes thank you for the correction... hammer spring is what I was referring to. I will try the wolf for now as Its all I see for "extra power" at brownells.. what would be the best?

I'll have to make another thread, but for the lower I have a standard parts kit, WMD Nickel Boron Hammer, Wolff Spring, ez pull pins, PRS 1 stock, Enhanced Trigger guard, and an A2 buffer tube.

This will be mated to a SH 29" upper in 50 BMG

[ARCHIVED THREAD] - Building a dedicated 50 lower which trigger?

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Building a dedicated 50 lower which trigger?

[ARCHIVED THREAD] - Building a dedicated 50 lower which trigger?