User Panel
User Panel
User Panel
|
Posted: 1/3/2012 8:04:22 PM EDT
[Last Edit: cchurchi]
[#1]
FNP .45 Tactical with Trijicon adjustable led RMR and AAC Tirant 45 suppressor. 300 Blackout firing 220gr subsonics suppressed is much, much quieter.
ETA: Ha! Thought you asked about the gun, the bag is an Eagle soft case. 
|
|
|
|
OH, USA
|
Posted: 1/3/2012 8:50:59 PM EDT
[Last Edit: watersniper]
[#2]
Originally Posted By Shawnr1:
Originally Posted By watersniper:
http://i576.photobucket.com/albums/ss204/watersniper/300Blackout001.jpg http://i576.photobucket.com/albums/ss204/watersniper/300Blackout008.jpg 300 BLK barrel by Core 15. 9.5" barrel, 1-8" twist. JP Handguard & Geissele match trigger from the National Defense Match. Registered SBR lower with Magpul furniture. Vortex red dot, Gemtech Trinity 9mm can with 5/8-24 adapter. (Yes, before the haters hate- I called Gemtech and they said for subsonic use only it's fine) Nice setup. I have a Trinity also that I plan on using whenever I get a .300 Blackout setup. I also asked Gemtech if the Trinity would hold up and got the same answer. It works great, I recommend it! Here's a video- My kid shot the video so the quality is a little rough- CORE15 barreled SBR 300 Blackout video Also, about the threads- I use Muzzloader anti-seize on the different Trinity adapters... |
|
|
|
Posted: 1/5/2012 7:05:39 AM EDT
[#3]
I'm almost there with my 300BLK SBR build. Just waiting on the last few parts to arrive so I can shoot it!
 Since it's taking the BATFE so damned long to approve NFA stuff these days, I'm setting it up so I can use my 9mm can (for subsonics) now. A dedicated can (Spike's MRS-2) will be coming later for the "Compressor" look. |
|
|
|
|
Posted: 1/5/2012 8:19:33 AM EDT
[#4]
Originally Posted By BlahBlah:
I'm almost there with my 300BLK SBR build. Just waiting on the last few parts to arrive so I can shoot it! http://www.vomschmidthaus.com/img/300blk/sbr_almost_there.jpg Since it's taking the BATFE so damned long to approve NFA stuff these days, I'm setting it up so I can use my 9mm can (for subsonics) now. A dedicated can (Spike's MRS-2) will be coming later for the "Compressor" look. Tell me about that mag  . Was that a template?
|
|
|
|
|
Posted: 1/5/2012 8:49:55 AM EDT
[Last Edit: BlahBlah]
[#5]
Originally Posted By miker84: Originally Posted By BlahBlah: I'm almost there with my 300BLK SBR build. Just waiting on the last few parts to arrive so I can shoot it! http://www.vomschmidthaus.com/img/300blk/sbr_almost_there.jpg Since it's taking the BATFE so damned long to approve NFA stuff these days, I'm setting it up so I can use my 9mm can (for subsonics) now. A dedicated can (Spike's MRS-2) will be coming later for the "Compressor" look. Tell me about that mag . Was that a template? There is a guy locally who does PMAGs like that. I'm not sure how he does it exactly, but he starts with a FDE or FG colored magazine and "prints" it with some sort of masking compound, then dyes them black. He can do just about any graphic that you can find. The one pictured was a small run he did for a local gun shop. The flag is on one side and the shop's logo is on the other. I have a stack of FDE mags and a good idea for a 300BLK graphic, so I'll probably have him do a bunch of them for me. ETA: Here is his website - http://www.abreoncustom.com/Home_Page.php |
|
|
|
|
Posted: 1/5/2012 10:55:27 AM EDT
[#6]
Originally Posted By Shawnr1:
Originally Posted By watersniper:
http://i576.photobucket.com/albums/ss204/watersniper/300Blackout001.jpg http://i576.photobucket.com/albums/ss204/watersniper/300Blackout008.jpg 300 BLK barrel by Core 15. 9.5" barrel, 1-8" twist. JP Handguard & Geissele match trigger from the National Defense Match. Registered SBR lower with Magpul furniture. Vortex red dot, Gemtech Trinity 9mm can with 5/8-24 adapter. (Yes, before the haters hate- I called Gemtech and they said for subsonic use only it's fine) Nice setup. I have a Trinity also that I plan on using whenever I get a .300 Blackout setup. I also asked Gemtech if the Trinity would hold up and got the same answer. Same thing with the Mulitmount. Keep it to subs and no problem. That said, mine will have a Sandstorm on it. |
|
|
|
|
Posted: 1/8/2012 8:09:34 PM EDT
[#7]
Mine:
Not the final configuration...a 3.5-15NF isn't what I had in mind for this  I'm also waiting on my F4 to clean on my Gemtech 762HVT.
|
|
|
|
|
Posted: 1/9/2012 9:24:39 AM EDT
[#8]
I'm still waiting on the gas block and gas tube (and I'll be waiting forever for the can
 ), but I threw the rail on for some more pics while I wait.  
|
|
|
|
|
Posted: 1/9/2012 3:25:07 PM EDT
[#9]
Originally Posted By BlahBlah:
I'm still waiting on the gas block and gas tube (and I'll be waiting forever for the can ), but I threw the rail on for some more pics while I wait.
http://www.vomschmidthaus.com/img/300blk/sbr_almost_there_2.jpg http://www.vomschmidthaus.com/img/300blk/sbr_almost_there_3.jpg http://www.vomschmidthaus.com/img/300blk/sbr_almost_there_4.jpg Length of bbl and rail? Looks like a 9" bbl and 10" rail, but my eyes may be playing tricks on me.... |
|
|
|
FL, USA
|
Posted: 1/9/2012 5:57:37 PM EDT
[#10]
Waiting on BUIS and optics, then off to the range......
|
|
|
|
Posted: 1/9/2012 6:51:58 PM EDT
[#11]
Originally Posted By BrownSunshine: Originally Posted By BlahBlah: I'm still waiting on the gas block and gas tube (and I'll be waiting forever for the can ), but I threw the rail on for some more pics while I wait.http://www.vomschmidthaus.com/img/300blk/sbr_almost_there_2.jpg http://www.vomschmidthaus.com/img/300blk/sbr_almost_there_3.jpg http://www.vomschmidthaus.com/img/300blk/sbr_almost_there_4.jpg Length of bbl and rail? Looks like a 9" bbl and 10" rail, but my eyes may be playing tricks on me.... Actually, it is a 10.3" Delta Company Arms barrel with a 10" Spike's BAR. |
|
|
|
|
Posted: 1/9/2012 9:13:13 PM EDT
[#12]
PWS Sporting Series 300BLK Upper
|
|
|
|
FL, USA
|
Posted: 1/9/2012 9:35:22 PM EDT
[#13]
Originally Posted By jasonusvi:
PWS Sporting Series 300BLK Upper http://primaryweapons.com/store/pc/catalog/PWS_Wdlnd_Black_Olive_300u_L_1.jpg I threw up in my mouth just a bit......... |
|
|
TX, USA
|
Posted: 1/9/2012 10:11:58 PM EDT
[#14]
Originally Posted By west467:
Originally Posted By jasonusvi:
PWS Sporting Series 300BLK Upper http://primaryweapons.com/store/pc/catalog/PWS_Wdlnd_Black_Olive_300u_L_1.jpg I threw up in my mouth just a bit......... some people just prefer woodgrain on a corvette...... |
|
|
|
Posted: 1/9/2012 10:16:20 PM EDT
[#15]
Originally Posted By GGGBeo50:
Originally Posted By west467:
Originally Posted By jasonusvi:
PWS Sporting Series 300BLK Upper http://primaryweapons.com/store/pc/catalog/PWS_Wdlnd_Black_Olive_300u_L_1.jpg I threw up in my mouth just a bit......... some people just prefer woodgrain on a corvette...... One of their pistons in 300BLK 
|
|
|
|
NM, USA
|
Posted: 1/10/2012 9:55:16 AM EDT
[#16]
Nothing fancy. |
|
|
TX, USA
|
Posted: 1/10/2012 4:50:59 PM EDT
[#17]
Originally Posted By jasonusvi:
Originally Posted By GGGBeo50:
Originally Posted By west467:
Originally Posted By jasonusvi:
PWS Sporting Series 300BLK Upper http://primaryweapons.com/store/pc/catalog/PWS_Wdlnd_Black_Olive_300u_L_1.jpg I threw up in my mouth just a bit......... some people just prefer woodgrain on a corvette...... One of their pistons in 300BLK http://primaryweapons.com/store/pc/catalog/PWS_MK109u_300_L_1.jpg now that is what im talking about. |
|
|
|
Posted: 1/11/2012 11:35:58 PM EDT
[Last Edit: huge_gator]
[#18]
I changed up my 300's a bit.
|
|
|
|
FL, USA
|
Posted: 1/12/2012 3:54:32 AM EDT
[Last Edit: 152dbs]
[#19]
Originally Posted By jasonusvi:
PWS Sporting Series 300BLK Upper http://primaryweapons.com/store/pc/catalog/PWS_Wdlnd_Black_Olive_300u_L_1.jpg Am i missing the Louisville Slugger trademark? not to be a total waste, ill post the pic of my Core15 SBR when i get it. |
|
|
MO, USA
|
Posted: 1/12/2012 6:14:48 AM EDT
[Last Edit: v188]
[#20]
i went the other direction and did a bolt gun first.
|
|
|
TX, USA
|
Posted: 1/12/2012 12:47:16 PM EDT
[#21]
Originally Posted By v188:
i went the other direction and did a bolt gun first. http://i42.tinypic.com/348rq0z.jpg Nice. why do I keep hearing rumors of feeding issues with the model 700 bolt guns? I assume you havent had any. |
|
|
MO, USA
|
Posted: 1/12/2012 1:10:41 PM EDT
[#22]
It's a Savage bolt gun. It was originally a 22-250 and I had Mike Klos at Amer Mfg make it for me. Put a 16 inch barrel, green Cerakote, currently wearing a Leopold scope that's a little too much, it was for the 22-250. Running a XXX can. Sounds great. I couldn't be happier. I'll add an AR upper one of these days. Don't know if I'll get a 16 inch or a shorty for the RR M16. Seems kind of pointless to blast away suppressed with the M16. Probably just get a 16 in upper, have it threaded and use it to deer hunt, etc.
|
|
|
MO, USA
|
Posted: 1/12/2012 1:11:35 PM EDT
[#23]
Originally Posted By GGGBeo50:
Originally Posted By v188:
i went the other direction and did a bolt gun first. http://i42.tinypic.com/348rq0z.jpg Nice. why do I keep hearing rumors of feeding issues with the model 700 bolt guns? I assume you havent had any. Sorry I didn't answer above, don't have any feeding issues. YMMV? |
|
|
TX, USA
|
Posted: 1/12/2012 2:27:51 PM EDT
[#24]
Originally Posted By v188:
Originally Posted By GGGBeo50:
Originally Posted By v188:
i went the other direction and did a bolt gun first. http://i42.tinypic.com/348rq0z.jpg Nice. why do I keep hearing rumors of feeding issues with the model 700 bolt guns? I assume you havent had any. Sorry I didn't answer above, don't have any feeding issues. YMMV? It could a rumor in the bolt gun community started by those who religiously shoot subs from their 762 NATO cartridges. If anything, it is a small portion of them, so the YMMV almost positively applies here. All I can think, is short case, heavy front end could nose down easier in some actions. |
|
|
|
Posted: 1/12/2012 9:23:16 PM EDT
[#25]
|
|
|
|
|
Posted: 1/12/2012 11:00:33 PM EDT
[#26]
Sun Devil upper / lower No forward assist PWS $70 Red dot YHM mid forearm on 11.3 Wilson Combat SS barrel YHM low profile gas block YHM flash hider YHM 308 can |
|
|
|
FL, USA
|
Posted: 1/13/2012 11:49:56 AM EDT
[#27]
Great looking weapon system you have there, I'm in the process of building a 300 blk myself...
|
|
|
NC, USA
|
Posted: 1/13/2012 12:43:00 PM EDT
[Last Edit: wahoo95]
[#28]
Just finished mine...
Wilson 11.3" Barrel DSA Upper Receiver Centurion 10' Rail DSA Trident FH MBUS Burris Tac-30 in Leupold Mark 2 Mount 
|
|
|
|
Posted: 1/13/2012 2:46:27 PM EDT
[#29]
Originally Posted By wahoo95:
Just finished mine... Wilson 11.3" Barrel DSA Upper Receiver Centurion 10' Rail DSA Trident FH MBUS Burris Tac-30 in Leupold Mark 2 Mount http://i210.photobucket.com/albums/bb244/a996hawk/photobucket-7871-1326474328924.jpg Curious how that TAC-30 is working for 300 BLK... |
|
|
|
|
Posted: 1/17/2012 3:12:35 PM EDT
[Last Edit: jasonusvi]
[#30]
Found posted on 300blktalk... SHOT show range day 
|
|
|
|
|
Posted: 1/18/2012 8:32:39 PM EDT
[#31]
My dad's 300BLK pistol:
|
|
|
|
FL, USA
|
Posted: 1/19/2012 6:29:57 AM EDT
[Last Edit: foxjordan22]
[#32]
|
|
|
TX, USA
|
Posted: 1/19/2012 9:39:45 AM EDT
[#33]
Originally Posted By foxjordan22:
http://i1221.photobucket.com/albums/dd473/foxjordan22/1326753764.jpg great looking rig. is that the 762sdn6 or the the 762sd? |
|
|
TN, USA
|
Posted: 1/19/2012 9:48:56 AM EDT
[#34]
|
|
|
|
Posted: 1/19/2012 9:58:22 AM EDT
[#35]
Great photos in this thread!
What I really want to see though, is an 8" 300BLK with a Mini Surefire or AAC suppressor with a report on how it sounds with subsonics. |
|
|
|
TN, USA
|
Posted: 1/19/2012 10:22:39 AM EDT
[#36]
AAC 9in 300BLK upper
AAC SDN6 Shot indoors using subsonics with no hearing protection..even the owner of the shop giggled 
|
|
|
FL, USA
|
Posted: 1/19/2012 10:47:14 AM EDT
[#37]
Originally Posted By GGGBeo50:
Originally Posted By foxjordan22:
http://i1221.photobucket.com/albums/dd473/foxjordan22/1326753764.jpg great looking rig. is that the 762sdn6 or the the 762sd? Thank you sir. 762sdn6, 8" Noveske. |
|
|
FL, USA
|
Posted: 1/19/2012 10:51:05 AM EDT
[#38]
Originally Posted By cchurchi:
Great photos in this thread! What I really want to see though, is an 8" 300BLK with a Mini Surefire or AAC suppressor with a report on how it sounds with subsonics. Here ya go. This is my mini4 in 5.56 on my Noveske 8" 300blk. No I don't shoot it like this just a pic. 
|
|
|
|
Posted: 1/19/2012 11:05:31 AM EDT
[#39]
Originally Posted By foxjordan22:
Originally Posted By cchurchi:
Great photos in this thread! What I really want to see though, is an 8" 300BLK with a Mini Surefire or AAC suppressor with a report on how it sounds with subsonics. Here ya go. This is my mini4 in 5.56 on my Noveske 8" 300blk. No I don't shoot it like this just a pic. http://i1221.photobucket.com/albums/dd473/foxjordan22/1326753776.jpg Sweet, thanks man - looks very maneuverable. I would like to get my 300BLK with a suppressor just a smidgen shorter, but since I'm already invested in an SDN-6, I'll probably leave it that way. |
|
|
|
FL, USA
|
Posted: 1/19/2012 11:13:56 AM EDT
[#40]
I hear ya. I have the mini4 for a 10" SCAR. With 5.56 suppressed its going to be loud no matter what suppressor is on it that's why I like the mini4 it's shorter lighter and still suppresses well. But in 300blk with the option of subsonic ammo I'd rather have the sdn6 so it is actually quiet. The numbers I've seen for the mini7 on subsonic 300blk are not that great.
|
|
|
|
Posted: 1/19/2012 12:13:21 PM EDT
[#41]
Here are a few of my 30 caliber friends.
Wilson 16" Barrel 13" VTAC Handguard Versa-pod Bipod AAC 762SD Suppressor 
8" Novekse Barrel 7" VTAC handguard 
|
|
|
|
|
Posted: 1/19/2012 5:34:13 PM EDT
[#42]
Handi-rifle- threaded 5/8-24, MSRP $359:
|
|
|
|
|
Posted: 1/19/2012 9:54:45 PM EDT
[#43]
Originally Posted By jasonusvi:
Handi-rifle- threaded 5/8-24, MSRP $359: http://www.tenpoundmonkey.com/web/handi.jpg Alright, that right there is a pretty cool toy! |
|
|
|
LA, USA
|
Posted: 1/20/2012 8:50:26 PM EDT
[Last Edit: jonblack]
[#44]
I'm in the process of building my first 300 Blackout.
Here is where I am so far: 
LAR Grizzly OPS-4 Ambi side charging upper POF 415 NP3 coated lower I am going to have Thomas (tp555) at Paladin Machine build my barrel and adjustable gas block. Don't have any idea of what else I am doing. Thanks jonblack |
|
|
TX, USA
|
Posted: 1/20/2012 9:31:22 PM EDT
[#45]
Originally Posted By bsmith918:
Originally Posted By jasonusvi:
Handi-rifle- threaded 5/8-24, MSRP $359: http://www.tenpoundmonkey.com/web/handi.jpg Alright, that right there is a pretty cool toy! This is right up my alley. I have a SBR in 300 blk, but I dont like taking it everywhere. This will end up even quieter because of the action of the AR. |
|
|
AK, USA
|
Posted: 1/21/2012 3:38:57 AM EDT
[#46]
Originally Posted By slanted:
http://i220.photobucket.com/albums/dd99/va_plinker/photo3.jpg http://i220.photobucket.com/albums/dd99/va_plinker/photo1.jpg NICE!!!! |
|
|
IN, USA
|
Posted: 1/22/2012 4:09:52 PM EDT
[#47]
My build thus far:
Spike Lower, VLTOR Mod Stock, 16" CMMG upper, DD A1.5 rear sight. Nice handy carbine, and shoots very nicely. |
|
|
IN, USA
|
Posted: 1/22/2012 8:46:57 PM EDT
[#48]
Started out with a red dot on it, but quickly realized My eyes do better with a scope, so I put a 1.5-5x on it.
Swapped out fore ends, so I did a barrel-less mock up of what a 9" barrel would look like... 
And some video... At about 1:00 there is some video of my rifle with a 9mm Thompson Machine can on it and after that, my upper on a buddy's M-16 lower. Video |
|
|
VA, USA
|
Posted: 1/24/2012 11:28:09 PM EDT
[#49]
Nice! How does the 8" Noveske shoot? That's the barrel I'm getting when my paperwork clears. (and the 7" VTAC hand guard) So far this is all I got for my upper..
Originally Posted By WTS-Mike:
Here are a few of my 30 caliber friends.
http://dl.dropbox.com/u/2374852/forum/300BLK-Rifle.jpg Wilson 16" Barrel 13" VTAC Handguard Versa-pod Bipod AAC 762SD Suppressor http://dl.dropbox.com/u/2374852/forum/300BLK-Pistol.jpg 8" Novekse Barrel 7" VTAC handguard http://dl.dropbox.com/u/2374852/forum/300BLK-Pistol-Sup.jpg http://dl.dropbox.com/u/2374852/forum/300BLK-Usup.jpg |
|
|
|
Posted: 1/24/2012 11:32:28 PM EDT
[#50]
Originally Posted By stagepaint: Nice! How does the 8" Noveske shoot? That's the barrel I'm getting when my paperwork clears. (and the 7" VTAC hand guard) So far this is all I got for my upper.. http://i250.photobucket.com/albums/gg271/butterscotchgent/IMG_0186.jpg What front sight is that? |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
