AR Sponsor
Posted: 2/25/2011 7:25:58 PM EDT
| I have a LR-308 with A2 stock. What I want to do is switch to a pardus collasable stock. I have the stock but what else do I need to complete this project. Any advise would help, thanks. |
| AFAIK you need the shorter carbine buffer tube and then spring/buffer for it. You also need to match the buffer tube to the stock you have, so find out if it is mil or commercial (measure it). You may or may not need the wrench to take the buffer tube off (A2). The original is probably loctite so a little heat may be in order. Hope that helps... and when in doubt, use a bigger hammer (jk). |
AR Sponsor