AR Sponsor
Posted: 4/1/2007 2:00:18 PM EDT
After a nice day of sighting the ar10 today I decided to take it down for cleaning. Apparently I got a little carried away when I took the trigger assembly out not knowing exactly which way the springs go back in. Anybody have a reference picture out there that could be used here. My main concern is on the hammer and hammer spring setup. I reinstalled it and when the trigger is pulled it releases fine but I want to make sure I have the springs lined up correctly. Newb problems. Here are some pics of what I have now. 
|
| Good to know. Its all put back together now. That was the first good cleaning its ever had and the damn thing took a while to get spotless. A glock usually takes me about an 45 minutes to do top to bottom but this was going on 2 hours. Any good tips in terms of cleaning out there? |
|
+1 All you need to do with the lower is give it a wipe down. There is no need to break it down that far unless you have an issue that may be due to build up. I have 1500 plus rounds in my lower and haven't removed the trigger pin etc yet. You need to clean the bore/barrel as your rifle dictates. |
AR Sponsor