AR Sponsor
Posted: 11/26/2004 12:51:42 PM EDT
|
OK....put another 200 rounds of Aussie surplus through my modified BAR-10 today. No malfunctions, which is getting to be normal with this gun. Accuracy continues to be superb. I have a spare parts kit now, as well, which fits nicely in the Vltor tube and TD VFG. Modifications and accessories are as follows: BMAS front flip up BUIS ARMS #40L BUIS Home-rolled buffer to allow use of VLTOR stock and tube Ergo grip and Gapper Cut and remove Izzy brake, add Armalite A2 FS Mods on order: Gemtech Bi-Lock for my TPR-S suppressor Surefire midlength rail system Latest pic:  |
|
My buffer started life as a Colt 9mm buffer. I measured the bolt carrier's travel into the buffer tube and ascertained the necessary OAL of the buffer from that. I weighed the factory buffer and decided to make the new one heavier, since the only known issue with the BAR10 is the extractors breaking. I wound up having to use tungsten for the weights, since steel ones were not heavy enough. The spring is the factory spring cut to 29 coils. The buffer does impact the back of the tube, as it is supposed to. I have 400 rounds through the gun with this new buffer arrangement with no malfunctions and no adverse effects. |
|
what clips are you using??? Have you found a decent manufacturer yet?? I have been to the range a few times now with my bar10 with mixed feeding results. I am not trying to stir anything up, I just want to know what brand/type of clips you guys are using, and if it works, where you got them from. I purchased several cheapos off the internet with sketchy results. On a positive note, I too am pleased with the incredible accuracy with the bushy-coulndt be happier. Thanks, Scott |
AR Sponsor