AR Sponsor
Posted: 9/14/2016 9:39:50 PM EDT
|
I just purchased a new Gen 3 POF 7.25" upper and it arrived today. It has their T rail on it, the predecessor to the MRR.
I was excited until trying to mount an optic to it. I planned to install a Meprolight TruDot RDS on this upper, and found that once instlled, the optic was loose and wobbled slightly. The Meprolight RDS has a small amount of adjustment in the clamping mechanisms, so I tightened them up a bit and still had the wobble. So, I opened the safe and mounted the Meprolight RDS to the following rifles- gen 3 POF P308, gen 3 POF P415, Colt LE6920, Sig 556 Classic SWAT, Sig M400, and my new IWI Tavor X95. The optic mounted up solidly to every single one of these rifles. Lastly, I decided to try mounting the optic on the left, right, and bottom rail of the T rail on the 7.25" upper. It mounted up solidly to each section. Then I placed it back on the top rail and it wobbled and was loose. So the very same rail, this optic mounts up solidly to all rail sections but the top. I contacted POF earlier today and am waiting to hear back from them. Does this sound like an out of spec rail to you as well? |
AR Sponsor