AR Sponsor
Posted: 2/10/2013 2:22:25 PM EDT
|
Hey guys, I have the 12.5 inch URX II on my Noveske Project Ares... When I press my thumb on the bottom portion of the rail (closest to the mag well) or push/pull my VFG, the bottom portion of the rail and heat guard move slightly vertical - enough that I can hear and feel it. it's driving me crazy when I grab my foregrip...
Thoughts? Is this normal? And is there a way to tighten it up without taking it apart with the proprietary wrench? Any help would be much appreciated. Thanks! |
|
Put two more screws at the back. I run mine with two at the rear, and two at the front for a total of four.
These are the screws you want... http://www.mcmaster.com/#cadinlnord/92220a181/=lfm8ly "Alloy Steel Low Head Socket Cap Screw 1/4"-20 Thread, 1/4" Length" They don't need to be stupid tight, but should be screwed on with some blue loctite to keep them from backing out. |
AR Sponsor