AR Sponsor
Posted: 11/23/2009 6:26:35 PM EDT
| I bought a used unit from a fellow high power shooter. All I got was the parts and no instructions. I managed to do the installation without any problems but I would like to get some info on adjusting it. Any help will be appreciated. |
|
You probably figured most of it out so far but here goes:
Front right screw is trigger overtravel Front left screw is for the 2nd stage engagement point. Rear screw is for 2nd stage pull weight. I'm just working from memory here since I'm not home so if something doesn't make sense let me know. One other thing you can do to help your lock time is replace the Jewel hammer spring with a normal or XP version. It won't hurt your pull weight but it will lower your lock-time. I use the KNS anti-spin pins so the pin retainer on the right side is not needed. If you don't use the KNS pins it might still work but I haven't tried it. B-Man |
| Thanks for the info. I kind of thought that the adjustment screws were as you stated. I'll finish up the assembly of the rifle and play with it till it feels good. I'm going to use the rifle in 3 gun matches so the pull weight can be as light as I want as long as safety is not compromised. |
AR Sponsor