[ARCHIVED THREAD] - SOPMOD Stock

Posted: 8/8/2006 4:57:36 AM EDT

I took my AR's into the shop to be worked on (turned down barrel move front site 2mm {I know odd right} and add a SOPMOD Stock.

The Gunsmith said the stock is really tight but he is going to play with it to make it a little more lose. Are they just really tight or is it because I just had the stock and had him replace the one on my RRA lower. I got the stock for free because a guy ordered it and then said I dont want to put it on and he was going to through it away along with his KAS handguards for a 20inch because he decided to get a M4 upper. Thanks for the help.

Scott

Posted: 8/8/2006 7:01:04 AM EDT

[#1]

The SOPMOD stock body is made for the smaller dimension tube, while your RRA tube is a larger outer dimension.
SOPMOD = "mil-spec" around 1.150"
RRA = commercial around 1.170"

Mike

Posted: 8/8/2006 7:13:10 AM EDT

[#2]

Yeat that can be a problem. I had him take it off. I am in the middle of a move and I might just sale it eventually. I just like the cheekweld mainly so I might get something less expensice to go with my IDF Sling. Thanks.

Posted: 8/8/2006 12:53:35 PM EDT

[#3]

He was going to throw out a $200 stock?

Is he stupid?

I can't believe he got it stretched on your tube. That gunsmith must be really un-educated.

[I'm sorry, he maybe he know's what he's doing-- with that in mind, i think I'll walk to the trash and dump the contents of my wallet in.]

Posted: 8/8/2006 2:23:25 PM EDT

[#4]

What happened is he has only worked with DPMS, RRA, and Bushmasters around here no one around has one of these stocks. I will probally one day justbite the bullet and pay the 35 bucks and do it myself or sell it if someone wants it.

[ARCHIVED THREAD] - SOPMOD Stock

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - SOPMOD Stock

[ARCHIVED THREAD] - SOPMOD Stock