AR Sponsor
Posted: 12/13/2003 3:57:52 PM EDT
| A1 post ban club foot.It rocks back and forth a little on the tube,is this normal?The tube is tight and does not move. |
|
Quoted: A1 post ban club foot.It rocks back and forth a little on the tube,is this normal?The tube is tight and does not move. are you using it with a full length of carbine buffer tube? if it's a full length, there should be no movement at all - just make sure you're using the A1 screw, not the A2 screw to hold it in. if you're using the pin to hold it in a carbine tube, slight manufacturing tolerances in the latch pin holes *might* account for a bit of movement. however, my A1 vltors have been tight on both colt and vltor carbine buffer tubes, as well as colt/bushy rifle tubes. cheers, MM |
| Not that this is going to be much of a help, but find out what you can, try what's recommended, and rest easy knowing that whatever happens, good or bad, Eric at Vltor is a standup guy, and as long as your doing what you have to he'll do what he has to to make sure that Vltor's working out the way it should. |
AR Sponsor